China M1080b Centerless Grinding Machine, Find details about China Centerless Grinding, Outer Diameter Grinding from M1080b Centerless Grinding Machine
M1080B | |||
The machine layout with side guide wheel frame moves. | |||
The multi piece wheel spindle hydrodynamicoil film bearing. | |||
The guide wheel shaft,wheel shaft overhang structure. | |||
The machine is equipped with cutting mechanism. | |||
The guide wheel shaft adopts whole 1:10 cone sliding bearing and a pair of single directing thrust bearing. | |||
The wheel speed AC frequency control (or by switching gear collocation and conversation speed regulation handle) | |||
Gringding dia(mm) | Thru-feed | 3-80mm | |
Plunge feed | 3-80mm | ||
Grinding length(mm) | Thru-feed | 180mm | |
Plunge feed | 250mm( customized) | ||
Gri.wheel spec(mm) | PSA500*150*305mm | ||
Reg.wheel spec(mm) | PSA300*150*127mm | ||
Gri.wheel speed(r/min) | 1300r/min | ||
Reg.wheel speed(r/min) | 5-250r/min(stepless) | ||
Prossessing time | 13,16,22,29,40,53,73,94r/min(stepless) | ||
Adjusting reg.wheel | 300r/min | ||
Reg.wheel swivel angle(°) | In vertical plane | -2° ~ +5° | |
In horizontal plane | 0° ~+3° | ||
Hand wheel dial feed | 0.005mm | ||
Height from centerline of gri.wheel®.wheel to workrest(mm) | 210mm | ||
Two gri.wheel distance(mm) | Max volumn | 510mm | |
Min volumn | 305mm | ||
Total power of machine(kw) | 17.7kw(Frequency converter speed adjustment)17kw(Gear speed adjustment) | ||
Grinding wheel motor power | 15kw | ||
Wheel motor power | 2.2kw 1.5kw | ||
Overall dimensions(mm) | 1940*1630*1500mm | ||
Machine weight(kg) | 3650KG | ||
Machine accuracy | Roundness 2.0μm Cylindricity 2.5μm Roughness 0.32μm | ||
Grinding wheel dresser | Turning angle | ±3° | |
Height of imitation | 20mm | ||
Feed rate of hand wheel perdivision(mm) | 0.01mm | ||
Wheel dresser | Turning angle | ±3° | |
In vertical plane In horizontal plane | -2°~5° | ||
Height of imitation | 20mm | ||
Feed rate of hand wheel perdivision(mm) | 0.01mm | ||
Feed mechanism | First rotary feed | 0.5mm | |
The indexing disc of each feed wheel | 0.005mm | ||
Rapid movement of the horizontal feed(when the swing lever swings 60 degrees) | 1mm | ||
Hydraulic system | Working pressure | 0.50MPA | |
Hydraulic pump flow | 5L/min | ||
lubrication system | Lubricating pump flow | 22L/min | |
Cooling system | Cooling pump flow | 50L/min |