China High Voltage Vlf AC Hipot Very Low Frequency Cable Generator Testing Equipment, Find details about China AC Hipot Tester High Voltage Generator, Very Low Frequency Tester from High Voltage Vlf AC Hipot Very Low Frequency Cable Generator Testing Equipment
Very Low Frequency Tester VLF
Introduction
Features
★ Data of current and voltage are obtained directly through the sampling of high-pressure side and it is true and accurate.
★ Over-voltage protection: the instrument will shut down to protection within 20 ms when the output voltage is exceeding limiting values of setting.
★ Over-current protection: design for dual protection of high and low voltage, downtime protection can be accurately set in high-pressure side. it will be shut down for protection and the action time is less than 20 ms when the current of low-voltage sides exceeds reacted current.
★ High-voltage output protection resistor design in the body boost and it is no need to additional outside resistor.
★ Closed-loop negative feedback control circuit of high and low voltage.
Technical index
1, Output frequency: 0.1Hz,0.05Hz,0.02Hz.
2, Accuracy: ± (3% of full scale +0.5 KV)
3, Voltage waveform distortion: ≤5%
4, Condition of use: indoor, outdoor, temperature: -10ºC∽+40ºC, humidity :≤85%RH
5, Power supply: AC50 Hz, 220V ±5%
Model | Rated Voltages | Load Capacity | Fuse | Weight | Use |
VLF-30 | 30kV (peak ) | 0.1Hz,≤1.1µF | 10A | Control :6kg Body Boost :30kg | 10KV Cables,Generator |
0.05Hz,≤2.2µF | |||||
0.02Hz,≤5.5µF | |||||
VLF-40 | 40kV (peak ) | 0.1Hz,≤1.1µF | 20A | Control :6kg Body Boost :50kg | 15.75KV Cables,Generator |
0.05Hz,≤2.2µF | |||||
0.02Hz,≤5.5µF | |||||
VLF-50 | 50kV (peak ) | 0.1Hz,≤1.1µF | 20A | Control :6kg Body Boost :50kg | 15.75KV Cables,Generator |
0.05Hz,≤2.2µF | |||||
0.02Hz,≤5.5µF | |||||
VLF-60 | 60kV (peak ) | 0.1Hz,≤0.5µF | 25A | Control :6kg HV TANK-I:30kg HV TANK-II:33kg | 18KV and below |
0.05Hz,≤1.0µF | |||||
0.02Hz,≤2.5µF | |||||
VLF-80 | 80kV (peak ) | 0.1Hz,≤0.5µF | 25A | Control :6kg Body Boost I:30kg Body Boost II:50kg | 35KV and below |
0.05Hz,≤1.0µF | |||||
0.02Hz,≤2.5µF |
Above model is the common requirement. It also can be customized for different voltage and load capacity.