Products

ASTM D924 Dissipation Factor Tan Delta Tester for Transformer Oil

China ASTM D924 Dissipation Factor Tan Delta Tester for Transformer Oil, Find details about China Oil Dielectric Loss and Resistivity Tester, Transformer Oil Dielectric Loss Analyzer from ASTM D924 Dissipation Factor Tan Delta Tester for Transformer Oil

Model NO.
EPOL60+
Power Source
AC220V
Capacitance
5PF~200PF
Relative Permittivity
1.000~30.000
Dielectric Loss Factor
0.00001~100
DC Resistivity
2.5mohmm~20 Tohmm
Accurancy Capacitance
+/-(1%Reading+0.5PF)
Accurancy Relative Permittivity
+/-1% of Reading
Accurancy Dielectric Dissipation Factor
+/-1%Reading+0.0001
Accurancy DC Resistivity
+/-10% of Reading
Resolution Capacitance
0.01PF
Resolution Relative Capacitively
0.001
Resolution Dielectric Dissipation Factor
0.00001
Measured Temperature Range
40~120 Degree
Temperature Measurement Error
+/-0.5 Degree
AC Test Voltage
200~2200V Continuously Adjustable, Frequency 50Hz
Power Consumption
100W
Trademark
EP Hipot Electric
Transport Package
Plywood Case
Specification
460mm*370mm*330mm
Origin
China
HS Code
9030899090
Model NO.
EPOL60+
Power Source
AC220V
Capacitance
5PF~200PF
Relative Permittivity
1.000~30.000
Dielectric Loss Factor
0.00001~100
DC Resistivity
2.5mohmm~20 Tohmm
Accurancy Capacitance
+/-(1%Reading+0.5PF)
Accurancy Relative Permittivity
+/-1% of Reading
Accurancy Dielectric Dissipation Factor
+/-1%Reading+0.0001
Accurancy DC Resistivity
+/-10% of Reading
Resolution Capacitance
0.01PF
Resolution Relative Capacitively
0.001
Resolution Dielectric Dissipation Factor
0.00001
Measured Temperature Range
40~120 Degree
Temperature Measurement Error
+/-0.5 Degree
AC Test Voltage
200~2200V Continuously Adjustable, Frequency 50Hz
Power Consumption
100W
Trademark
EP Hipot Electric
Transport Package
Plywood Case
Specification
460mm*370mm*330mm
Origin
China
HS Code
9030899090
General Information:
EPOL60+ Automatic Oil Dielectric Loss and Resistivity Tester, is used for measuring dielectric dissipation factor and DC resistivity of insulating oil and other insulating liquids. The instrument integrates with test oil cell, temperature controller, temperature sensor, dielectric loss test bridge, AC test power, standard capacitor, high resistance meter, DC high voltage source and other major components.

EPOL60 is Automatic Oil Dielectric Loss Tester.

Features:
  • The Oil vessel adopts the three-electrode structure according to standard IEC 60247:2004, with electrode spacing 2mm, which can eliminate the effects of the stray capacitance and leakage on dielectric loss test results.
 
  • The instrument adopts the medium frequency induction heating, PID temperature control algorithm. This heating method has the advantages of non-contact between the test cell and the heating body, uniform heating, fast speed, convenient control, and strictly control of the temperature within error range of the preset temperature.
 
  • Internal standard capacitor is SF6 gas-filled three-electrode capacitance, and its capacitor dielectric loss and electrical capacity are not affected by ambient temperature, humidity etc, so that the instrument accuracy can be ensured even after prolonged use.
 
  • AC test power supply uses AC-DC-AC conversion, which effectively prevents the fluctuations in mains voltage and frequency from affecting the dielectric loss measurement accuracy. Even use a generator, the instrument can work properly.
 
  • Perfect protection function. When there is over voltage, over current or high-voltage short circuit, instruments can quickly cut off high voltage, and issues a warning message. When the temperature of the sensor failure or not connected, the instrument will also issue a warning message.
 
  • There is a temperature limiting relay in the medium frequency induction heating furnace. When temperature above 120 ºC, the instrument frees the relay and stops heating.
 
  • Convenient test parameter setting. Temperature setting range 0~120ºC, AC voltage setting range 200~2200V, DC voltage setting range 0~500V.
 
  • Large TFT touch screen, with backlight and clear display. With simply set up, the instrument can be automatically tested. And automatically store and print test results.
 
  • Built-in real-time clock, the test date and time can be saved, displayed and printed with the test results.
 
  • Calibration functions of cleaned dry vessel. The measurement of dry vessel's capacitance and dielectric loss factor can determine its cleaning and assembly conditions. The calibration data is automatically saved and so that it facilitates the calculation of relative permittivity and DC resistivity.
 
  • The instrument takes the RAM9 platform as the core, the test accuracy is high and the speed is fast.

Technical Specifications:
Voltage supply:AC 220V±10%
Power frequency:50Hz/60Hz ±1%
Measuring range
Capacitance:5pF~200pF
Relative Permittivity:1.000~30.000
Dielectric loss factor:0.00001~100
DC resistivity:2.5 MΩm~20 TΩm
Measuring Accuracy
Capacitance:±(1%reading+0.5pF)
Relative permittivity:±1% of reading
Dielectric dissipation factor:±(1%reading+0.0001)
DC resistivity:±10% of reading
Resolution
Capacitance:0.01pF
Relative capacitively:0.001
Dielectric dissipation factor:0.00001
Measured temperature range:40~120ºC
Temperature measurement error:±0.5ºC
AC Test Voltage:200~2200V Continuously adjustable, frequency 50Hz
Power consumption:100W
Ambient temperature:0ºC~40ºC
Relative humidity (RH):<75%
Dimensions:460mm×370mm×330mm
Total weight:25kg

More details about Insulation Oil Dielectric Loss and DC Resistivity Tester EPOL60+, please contact EPHipot Electric, we have professional tech team to design correctly designed products and systems.

ASTM D924 Dissipation Factor Tan Delta Tester for Transformer Oil
ASTM D924 Dissipation Factor Tan Delta Tester for Transformer Oil
ASTM D924 Dissipation Factor Tan Delta Tester for Transformer Oil
ASTM D924 Dissipation Factor Tan Delta Tester for Transformer Oil
ASTM D924 Dissipation Factor Tan Delta Tester for Transformer Oil





 

You Might Also Like