1. Imported solenoid valve, effectively guarantee the stability of the machine running, and reduce the failure rate to a minimum.

2. The standard machine configuration is Single action, two cylinders can't work together.

(The double valve structure for choose to make 2 cylinders work together)

3. With imported gear pump, low noise, small size, large flow, smooth operation.

4. Siemens motor, good stability, the failure rate is substantially zero. Meanwhile, effective in energy saving.

5. Adopts Schneider Electric (including circuit breakers, contactors, thermal overload, small relays, the stroke switch, buttons), cable clear enough to reduced electrical fault.

6. Using oil cooling device, open and close freely according to temperature conditions.
When the temperature is too high, continuous overload working, it can keep oil temperature normal to ensure the feasibility of high pressure, long time working.

7. With three high-pressure tubing to ensure that no oil leakage.

8. Cylinder block use 40 cr high strength alloy material integral forging, ductile iron piston guide sleeve mounted without a gap.

9. Resistance to high temperature (Limit 700 ºC) for a long time to prevent overheating, causing internal cylinder guide sleeve deformation, resulting in cylinder oil leakage.

10. Multifunction manual backgauge to position within one meter length shear angle, channel, round bar, square steel, flat steel and other metal materials.