Application
Multicore cables insulated and sheathed with heat resistant silicone rubber without strain relieving elements are used in high temperatures or with contact to hot-surfaces. These cables are installed for fixed installation, mechanical protected, for internal wiring of lighting fixtures in industrial application. It is recommended for the application of the apparatus which are moving during the operation with less mechanical stress.
Advantages - Hardly changes of dielectric strength and the insulation resistance also at high temperatures.

Technical data
- Heat-resistant multicore cable to DIN VDE 0282 part 15, HD 22.15 S1
- Temperature range -608C to +1808C(+2508C for short time)
- Temperature limit at conductor in operation +1808C
- Nominal voltage U0/U 300/500 V
- Test voltage 2000 V
- Specific volume resistivity min. 200 G Wx cm
- Minimum bending radius min. 7,5 x cable 1
- Radiation resistance up to 20 x 106 cJ/kg (up to 20 Mrad)

Cable structure
- Tinned or bare1) copper conductor, stranded to DIN VDE 0295 cl. 5, BS 6360 cl. 5, HD 383 cl. 5 and IEC 60228
- SiR core insulation, crosslinked (rubber compound) E I2 to DIN VDE 0207 part 20
- Core identification to DIN VDE 0293 - Green-yellow earth core, 3 cores and above
- Cores stranded in layers with optimal lay-length
- Outer jacket of crosslinked EM9 (rubber compound) to HD 22.3 S3 : 1994/A1 : 1999
- Jacket colour black (RAL 9005)
- Also available in other sheath colours
- Behavior in fire: Test of vertical flamepropagation to DIN VDE 0482 part 265-2-1 and DIN EN 50265-2-1, not valid for the cables with polyesterbraiding (Type H05SST-F)
- Cable structure H05SST-F - As per H05SS-F - Polyester braiding

Type of the cable