Products

CNC Horizontal Large Lathe

China CNC Horizontal Large Lathe, Find details about China Large Size Lathe Machine, Bed-Type Lathe Machine from CNC Horizontal Large Lathe

Model NO.
T1000/1500&T1250/1500&T1400/1500&T1600/1500
Automatic Grade
Automatic
Setting Mode
Floor-type
Precision
High Precision
Max. Swing Over Bed
1000/1250/1400/1600mm
Maximum Length of Workpiece
1500-10000mm
Spindle Bore
130mm
Trademark
Acemachinetools
Specification
CE
Origin
China
Model NO.
T1000/1500&T1250/1500&T1400/1500&T1600/1500
Automatic Grade
Automatic
Setting Mode
Floor-type
Precision
High Precision
Max. Swing Over Bed
1000/1250/1400/1600mm
Maximum Length of Workpiece
1500-10000mm
Spindle Bore
130mm
Trademark
Acemachinetools
Specification
CE
Origin
China
CNC Large Lathe (T1000/1500&T1250/1500&T1400/1500&T1600/1500)

Max. Swing over bed: 1000/1250/1400/1600mm
Max. Swing over carriage: 620/870/990/1190mm
Maximum length of workpiece: 1500-10000mm
Spindle bore: Φ 130 mm


This machine has the following features:

Longitudinal and cross feeds are effected by servo motor drive through ball screws.

Φ 130mm spindle bore, short taper positioning spindle nose for high precision and rigidity.

Centralized lubrication system in headstock for less heating and heat distortion.

Supersonic frequency hardened guide ways to ensure high precision and long service life.

2 axle closs-circle control, AC servo motor, Semi-closed loop control system. High-strength casting bed with high-frequency chilling and priecise grinding.

Slidewaygluded low-fricton plastics
ITEMST1000/1500T1250/1500T1400/1500T1600/1500
Max. swing over bedΦ1000 mmΦ1250 mmΦ1400 mmΦ1600 mm
Max. swing over carriageΦ620 mmΦ870 mmΦ990 mmΦ1190 mm
Width of bed755 mm970 mm
Maximum length of workpiece1.5/2/3/4/5/6/8 m1.5/2/3/4/5/6/8/10 m
Max. turning length1.3 /1.8 /2.8 /3.8/4.8/5.8/7.8m1.3 /1.8 /2.8 /3.8/4.8/5.8/7.8/9.8m
Max. weight be tween centers5000Kg6000Kg
Spindle noseA2-15
Spindle boreΦ130 mm
Cone hole diameter and taper of spindle holeΦ140 1 : 20
Steps of spindle speed(Manual)2
Range of spindle spec2.5 ~ 34  20 ~ 270 r/min
Rapid feed for Z axis8m/min
Rapid feed for X axis5 m/min
Max. travel of Axis Z8m
Max. travel of Axis X600 mm820 mm900 mm
Max. Input0.001 mm
Tool post stations4
Tool cross section40×40mm50×50mm
External diameter of tailstock sleeveΦ160mm
Taper of bore of tailstock sleeve80
Max. traverse of tailstock sleeve300mm
X/Z motor torque37 Nm/37 Nm37 Nm/42 Nm
Spindle motor power22/26 KW ( sleeve )
Power of cooling pump250W
3m Overall dimensions(L×W×H)6100×2370×2230 mm6100×2370×2300 mm6200×2280×2100 mm6200×2280×2300 mm
Net weight ( 3m )11500Kg12300 Kg12700 Kg13500
Note: For each additional machine length of 1m there will be addition net weight of 300Kg.

You Might Also Like