Products

Drilling Medium Hard Formation Rock Bit

China Drilling Medium Hard Formation Rock Bit, Find details about China TCI Cone Bit, Cone Bit from Drilling Medium Hard Formation Rock Bit

Model NO.
IADC CODE
Suitable Formation
Soft, Medium Soft, Hard, Medium Hard, Very Hard
Color
Blue or Red
Trademark
HJ
Specification
according requirement
Origin
China
HS Code
8207191
Model NO.
IADC CODE
Suitable Formation
Soft, Medium Soft, Hard, Medium Hard, Very Hard
Color
Blue or Red
Trademark
HJ
Specification
according requirement
Origin
China
HS Code
8207191
Drilling Medium Hard Formation Rock Bit

Model: TCI BIT, STEEL TOOTH BIT

IADC code: 116 117 12 6127 136 137 216 217 226 226 316 317 326 327 336 337 115 125 135 215 225 235 315 325 417 427 437 517 527 537 617 627 637 737 837 832 415 425 435 445 525 625 635 416 427 436 446 447

Available sizes: From 2 7/8 to 26"


Bearing type: Sealed bearing and non-sealed bearing
Metal sealed journal bearing
Rubber sealed journal bearing
Cutting structure: The back cone and the teeth all surface is are hardfaced strengthening, improved steel tooth shape and welding materials, showing teeth higher

1. Tricone bit cutting structure
Adopting new formula of new technology of the high quality hard alloy tooth, enhance the cutting teeth mechanical properties.

2. Tricone bit diameter structure
Using multiple gage protection structure: Die with multidrug trimming tooth (GT teeth), round back, claw back set have cemented carbide gear, surfacing resistance mo alloy, strengthen ZhaoJian and anterior apply welding, greatly improving the drill gage protection ability.

3. Tricone bit bearing structure
Adopting high precision with radial sliding, two way thrust bearings, ball tight. Tooth claw big shaft neck and two stop surface welding have wear-resisting alloy, cone big hole and two stop surface solution and silver inlaid special alloy, increase the abrasion resistance and resistance bearing vice occlusive ability, improve bearing ability of high speed vice adapt.
IADCWOB
(KN/mm)		RPM
(r/min)		Applicable Formations
114/116/1170.3~0.75180~60Very soft formations with low compressive strength and high drillability, such as clay, mudstone, chalk, etc.
124/126/1270.3~0.85180~60Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc.
134/135/136/137 0.3~0.95150~60Soft to medium formations with low compressive strength and high drillability, such as medium soft shale, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc.
214/215/216/2170.35~0.95150~60Medium formations with high compress strength, such as medium soft shale, hard gypsum , medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc.
227  0.35~0.95150~50Medium hard formations with high compressive strength, such as abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble,etc
Note: The upper limits of WOB and RPM in above table should not be used simultaneously.
 
IADCWOB
(KN/mm)		RPM
(r/min)		Applicable Formations
417/437/
 447/415/435		0.35~0.9150~70Very soft formations with low compressive strength and high drillability, such as clay, mudstone, chalk, gypsum, salt, soft limestone, etc.
517/527/5150.35~1.0140~60Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc.
537/547/535 0.45~1.0120~50Soft to medium formations with low compressive strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc.
617/6150.45~1.190~50Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc
637/635  0.5~1.280~40Hard formations with high compressive strength, such as sandstone, limestone, dolomite ,hard gypsum, marble, etc.
Note: The upper limits of WOB and RPM in above table should not be used simultaneously.

You Might Also Like