Rexroth A2f A2fo A2FM A2fe Hydraulic Pump and Motor From China for Concrete Car

Rexroth A2f A2fo A2FM A2fe Hydraulic Pump and Motor From China for Concrete Car, Find details about China Hydraulic Motor, Hydraulic Piston Motor from Rexroth A2f A2fo A2FM A2fe Hydraulic Pump and Motor From China for Concrete Car

Basic Info.

Model NO.

A2FE

Type

Plunger Type

Model

A2fe55

Original

China

Application

Construction Machinery

Trademark

FOCOR

Transport Package

Wooden Case for Export

Specification

piston

Origin

China

HS Code

84122910

Model NO.

A2FE

Type

Plunger Type

Model

A2fe55

Original

China

Application

Construction Machinery

Trademark

FOCOR

Transport Package

Wooden Case for Export

Specification

piston

Origin

China

HS Code

84122910

Product Desciption

Rexroth Hydraulic Motor A2FE Series

A2FE180 hydraulic motor new brand made in Germany

Hydraulic fixed motor A2FE28, A2FE32, A2FE45, A2FE56, A2FE63, A2FE80, A2FE90, A2FE107, A2FE125, A2FE160, A2FE180,
A2FE250, A2FE355

Description

Open and closed circuits
Series 61 and 60
Pressure:
Size 28 to180 Nominal pressure 5800 psi (400 bar)/ Peak pressure 6500 psi (450 bar)
Size 250 to 355 Nominal pressure 5100 psi (350 bar)/ Peak pressure 5800 psi (400 bar)

The A2FE fixed plug-in motor with axial tapered piston rotary group of bent-axis design, for hydrostatic drives in open and closed circuits
-Far-reaching integration in mechanical gearbox due to recessed mounting flange located in the center of the case (extremely space-saving construction)
-The output speed is dependent on the flow of the pump and the displacement of the motor.
-The output torque increases with the pressure differential between the high-pressure and the low-pressure side.
-Small dimensions.
-High total efficiency.
-Complete unit, ready-assembled and tested.
-Easy to install, simply plug into the mechanical gearbox.
-No configuration specifications to be observed when installing.

Technical Data
Table of values (theoretical values, without efficiency and tolerances; values rounded)

Rexroth A2FE motor			A2FE28	A2FE32	A2FE45	A2FE56	A2FE63	A2FE80
Displacement	Vg	cm3	28.1	32	45.6	56.1	63	80.4
Speed maximum	nnom	rpm	6300	6300	5600	5000	5000	4500
Speed maximum	nmax2)	rpm	6900	6900	6200	5500	5500	5000
Input flow Vg	qV	L/min	177	202	255	281	315	362
Torque at Vg and	Dp = 350 bar	T	Nm	157	178	254	313	351
Torque at Vg and	Dp = 400 bar	T	Nm	179	204	290	357	401
Rotary stiffness	c	kNm/ rad	2.93	3.12	4.18	5.94	6.25	8.73
Moment of inertia	JGR	kgm2	0.0012	0.0012	0.0024	0.0042	0.0042	0.0072
Maximum angular	a	rad/s2	6500	6500	14600	7500	7500	6000
Case volume	V	L	0.2	0.2	0.33	0.45	0.45	0.55
Mass (approx.)	m	kg	10.5	10.5	15	18	19	23
Size			A2FE90	A2FE107	A2FE125	A2FE160	A2FE180	A2FE250	A2FE355
Displacement	Vg	cm3	90	106.7	125	160.4	180	250	355
Speed maximum	nnom	rpm	4500	4000	4000	3600	3600	2700	2240
Speed maximum	nmax2)	rpm	5000	4400	4400	4000	4000	-	-
Input flow	qV	L/min	405	427	500	577	648	675	795
Torque at Vg	Dp = 350 bar	T	501	594	696	893	1003	1393	1978
Torque at Vg	Dp = 400 bar	T	573	679	796	1021	1146	-	-
Rotary stiffness	c	kNm/rad	9.14	11.2	11.9	17.4	18.2	73.1	96.1
Moment of inertia	JGR	kgm2	0.0072	0.0116	0.0116	0.022	0.022	0.061	0.102
Maximum angular	a	rad/s2	6000	4500	4500	3500	3500	10000	8300
Case volume	V	L	0.55	0.8	0.8	1.1	1.1	2.5	3.5
Mass (approx.)	m	kg	25	34	36	47	48	82	110

Hydraulic fluid
Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids) and RE 90222 (HFD hydraulic fluids) and RE 90223 (HFA, HFB, HFC hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions. The plug-in motor A2FE is not suitable for operation with HFA hydraulic fluid. If HFB, HFC or HFD or environmentally acceptable hydraulic fluids are used, the limitations regarding technical data or other seals must be observed.
Details regarding the choice of hydraulic fluid
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a closed circuit, the circuit temperature, in an open circuit, the reservoir temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range (νopt), see shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C, an operating temperature of 60 °C is set in the circuit. In the optimum operating viscosity range (νopt., shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68.
Note: The case drain temperature, which is affected by pressure and speed, can be higher than the circuit temperature or reservoir temperature. At no point of the component may the temperature be higher than 115 °C. The temperature difference specified below is to be taken into account when determining the viscosity in the bearing. If the above conditions cannot be maintained due to extreme operating parameters, we recommend the use of a flushing and boost pressure valve.
Shaft seal
Permissible pressure loading the service life of the shaft seal is influenced by the speed of the axial piston unit and the case drain pressure (case pressure). The mean differential pressure of 2 bar between the case and the ambient pressure may not be enduringly exceeded at normal operating temperature. For a higher differential pressure at reduced speed, see diagram. Momentary pressure spikes (t < 0.1 s) of up to 10 bar are permitted. The service life of the shaft seal decreases with an increase in the frequency of pressure spikes.

Rexroth A2f A2fo A2FM A2fe Hydraulic Pump and Motor From China for Concrete Car