Product Introduction
This protective clothing adopts three-layer structure, which is the outer fabric of new fire-fighting protective clothing (flame armor), waterproof and breathable layer (heat insulation layer) (aramid non-woven fabric+flame retardant PTFE film) and the comfort layer of new fire-fighting protective clothing (new fire-fighting comfort layer). Protective clothing has the advantages of flame retardant, waterproof and breathable, heat insulation, anti-static and eye-catching logo, which can protect firefighters from long-term fire fighting. A hidden life-saving drag belt (DRD) is arranged under the back collar of protective clothing, so that when rescuers are injured or fall to the ground, other team members can quickly drag them away from the dangerous scene.

Materials and Structurer
(1) Main structurer
1. The upper and lower split structure, with the overlapping part between jacket and trousers ≥200mm.
2. Collar: The collar is designed as a stand collar, with a protective collar at the front collar, and the inner side of the collar is made of color-fitting and comfortable fabric.
3. Reflective marking tape: A 360-degree annular reflective marking tape is set on the chest, hem and cuffs of the jacket, and a 360-degree annular reflective marking tape is set on the legs of the trousers. The width of reflective marking tape is 50.8mm(2 inches), and the color is yellow, silver and yellow.
4. Trouser crotch: The crotch of trousers adopts an integrated design.
5. Pant strap: It is equipped with H-shaped strap, the length of which can be adjusted as required and can be disassembled. 6. The zipper size of the front placket of the jacket is No.8.

(2) Additional structurer
1. Pocket: A radio stereo pocket is arranged outside the left chest of the jacket, with an internal insertion pocket and an external patch pocket at the hem. One tool bag is set on the lateral thigh. All outer pockets are provided with water leakage holes.
2. Left arm hook and loop: A 90mm×110mm shield-type hook and loop is set on the outer side of the left upper arm, and a shield-type logo can be pasted.
3. Cuff: The cuff is designed with horseshoe cuffs, the outer material is wrapped, the tightening adjustment loops are set, and the ribbed protective wristband is equipped with thumb holes, and the inside is provided with water-stopping cloth.
4. Coat placket: The hook and loop of coat placket is through design.
5. Jacket hem: The hem of the comfort layer of the jacket is provided with water-stopping cloth.
6. Trousers leg opening: The trousers leg opening is designed in an arc shape, with water-stop cloth inside, zipper inside, and wear-resistant material wrapping around the trousers leg.
7. Reinforcement treatment: The shoulders, elbows and knees are thickened with wear-resistant layer, which is soft and easy to clean.
8. There are two hanging tabs on the left and right shoulders.

Product detail photos
Upper jacket



Pants




Collar



Sleeve



Waist



Pants



Loop belt


 

Reflective tape

Water stop cloth



Pocket



ApplicationPay attention
1. Try to avoid direct contact between protective clothing and flame, molten metal and sharp objects.
2. It is forbidden to use protective clothing in high temperature, chemical, radiation and electric fields.
3. If the original structure of protective clothing has been damaged due to wear, tear or chemical erosion, it should be discarded. Unless the company's special fabrics and special high-temperature resistant sewing threads are used for repair, it is strictly prohibited to use other fabrics that have not been tested for fireproof performance without authorization, so as not to affect the overall flame retardant performance of clothing and possibly cause accidents during operation.

Maintenance
1. Firefighters should regularly check the protective clothing they wear, and clean it in time when there are stains. Wash with water or professional washing machine to avoid dry cleaning. The water temperature should be 35-48ºC, and neutral detergent should be added to avoid bleach and softener.
2. If the protective clothing is contaminated with serious stains such as oil stain and blood stain, it should be smeared with multiple amounts of detergent in advance, rubbed by hand or lightly brushed with a brush and rinsed with clear water before washing. Please disinfect with disinfectant after removing blood stains.
3. Avoid long-term exposure to sunlight or fluorescent lamps when the protective clothing is dried to prevent ultraviolet rays from damaging the protective performance. If drying is adopted, the temperature during drying should not exceed 60ºC, so as to prevent the micropores in the breathable layer from blocking and affecting the breathable effect of clothing.
4. Protective clothing should be stored in a dry and ventilated warehouse. In addition, it must be washed and dried before storage to ensure that this garment is clean and tidy before storage.
5. When the protective clothing needs to be stored in a whole case, the cartons should be placed on wooden boards or shelves to prevent the clothing from getting damp. If it is stored for a long time, it should be taken out and dried regularly to prevent clothes from getting damp, mildew, insects and bacteria.
6. Avoid mixing protective clothing with inflammable and explosive articles or chemicals such as oil, acid and alkali during transportation.