Part 1:Product introduction
  Welcome to use zfmh-hc E(DRD) type 17 firefighter fire protection suit produced by our company (hereinafter referred to as protective suit). This protective clothing USES four layer structure, respectively is the outer (d pute enhanced bond), waterproof breathable layer (aramid fiber non-woven + flame retardant PTFE membrane), heat insulation layer (aramid fiber spunlaced blanket) and comfortable layer (d aramid viscose fire-retardant) bond. The protective suit has the advantages of flame retardant, waterproof and breathable, heat insulation, anti-static and eye-catching logo, etc., which can protect the firefighters from long time fire fighting.

Part 2:Materials and structures
(I) main structure:
1. Upper and lower body structure, the overlapping part between jacket and trousers is more than 200mm.
2. Collar: the collar is vertical collar design, the front collar is provided with a guard collar, and the inside of the collar is made of pastel and skin-tight comfortable fabric.
3. Reflective marking belt: there is a 360-degree circular reflective marking belt for each coat on the chest, hem and cuff, and a 360-degree circular reflective marking belt for each pair of trousers on the small legs. The reflective tape is 50.8mm (2 inches) wide and has a yellowish-silver color.
4. Pants crotch: pants crotch adopts integrated design.
5. Trousers back strap: it is equipped with H type back strap, which can be adjusted as required and disassembled.
6. The front lapel of the coat is no. 8.
(2) subsidiary structure
1. Pockets: radio stereo pockets are set outside the left breast of the coat, and inner pockets are arranged inside, and outer pockets are set at the bottom. Outside thigh each set tool bag 1. All outer pockets are provided with leakage holes.
2. Left arm magic patch: 90mm * 110mm shield type magic patch is set on the outside of the upper left arm, which can be pasted with shield type logo.
3, cuff: cuff place USES the horseshoe cuff design, outer material package edge, set to tighten regulation loops, and configure the rib protection wristbands, protective wristbands on the thumb hole rib, set inside the water stop cloth.
4. Front of the coat: the front of the jacket is a through - through design.
5. Upper hem: the lower hem of the upper comfortable layer is provided with waterproof cloth.
6. Bottom of trousers: the bottom of trousers adopts circular arc design, waterproof cloth is set inside, zipper is set inside and wear-resistant material is set at the bottom.
7. Reinforcing treatment: the shoulder, elbow and knee are thickened with wear-resistant layer, which is soft and easy to clean.
8. There are two hanging loops on the left and right shoulder.

Part 3:Product specification
This product is divided into 12 sizes, and special specifications can be customized according to customer requirements.
Part 4:Product style details