China 1MHz Ultrasonic Transducer Depth Measurement for Submarine Range Finder, Find details about China Ultrasonic Sensor for Flow Meter, Ultrasonic Depth Transducer from 1MHz Ultrasonic Transducer Depth Measurement for Submarine Range Finder
Items | Technical Parameters | Image | |
Name | 1MHz underwater ultrasonic transducer | ![]() ![]() | |
Model | PHW-1M-W | ||
Frequency | 1MHz±5% | ||
Detection Distance | 0.10 ~ 3.0m | ||
Minimum Parallel lmpedance | 15Ω±20% | ||
Capacitance | 2500pF±20% @1KHz | ||
Sensitivity | Driving Voltage:24 Vpp,Distance:0.3m, Echo Amplitude:2.0 V | ||
Operating Voltage | Peak Voltage<300VPP | ||
Operating Temperature | -10~+50ºC | ||
Pressure | 5MPa | ||
Angle | (Beamwidth) Half-power Beam Width@-3dB:3.0°±0.5, Sharp Angle:7.0°±1 | ||
Housing Material | 316 | ||
Usage | submarine range finder | ||
Installation Dimension | See the product structure drawing | ||
Protection Level | IP68 | ||
Weight | 270g±5%(Length:1m) | ||
Wiring Instructions | Red+,White-; yellow,white:the two poles of MF58 thermoreceptor; | ||
Admittance Curve | Product Structure Diagram | ||
![]() | ![]() |
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor