Customized DC High Voltage Generator Hipot Test Set

China Customized DC High Voltage Generator Hipot Test Set, Find details about China DC Hipot Tester, Hipot Tester from Customized DC High Voltage Generator Hipot Test Set

Model NO.
HFZG-8100E
Accuracy Grade
0.5
Load Way
Electronic Load
Loading Method
Dynamic Load
Display
Digital
Control
Computer Control
Weight
0-100Kg
Power Source
AC220V
Oil Cylinder Position
Under
Power Supply
AC 220±10% /50Hz
Output Voltage
1-500kv
Rated Current
2mA-10mA
Trademark
Hengfeng
Transport Package
Non-Fumigation Wooden Case
Specification
350*400*450*
Origin
China
Model NO.
HFZG-8100E
Accuracy Grade
0.5
Load Way
Electronic Load
Loading Method
Dynamic Load
Display
Digital
Control
Computer Control
Weight
0-100Kg
Power Source
AC220V
Oil Cylinder Position
Under
Power Supply
AC 220±10% /50Hz
Output Voltage
1-500kv
Rated Current
2mA-10mA
Trademark
Hengfeng
Transport Package
Non-Fumigation Wooden Case
Specification
350*400*450*
Origin
China
                                                  Automatic DC Hipot Tester for insulation test 120kv/5mA
Customized DC High Voltage Generator Hipot Test Set
Product introduction
DC hipot tester is widely applied in the DC HV tests carried out for the zinc oxide lightening arrester, magnetic blow-out arrester, power cable, generator, transformer, circuit breaker, etc.
60/80/100/120/200/250/300/400/500KV,
2/3/5/10mA can be customized.

Customized DC High Voltage Generator Hipot Test Set

Features
1. High reliabiliy: high frequency voltage multi-doubler reticfier, simple circuit, high overload capability, rare fault, without maintenance.

2. Small volume: one person can carry the largest HVDC generator (200kV/2mA). Its volume is only 1/(2~5) as the volume of the same kind of equipment made in Japan. It reaches the advanced level in the world.

3. Perfect seal by metal housing, high mechnical stength. Irs performence will not be influenced by viberation, moisture, dust and meterological condition.

4. Safe, convenience in operation, metal housing grounded. built-in HV terminals.

5. There is no high voltage and low voltage connecter outside, easy connection.

6. Good auto protection function. It can nor be switched on if the HV output knob is not at zero position. Poeration is simplw. It will not cause maloperation and automatically switch off in over voltage and overcurrent case. There is dampong resistor indide.It is not necessary to connect damping resistor outside.

7. Excellent accuracy: The leakage current at HV side is meadured by digital meter accuracy: 1uA, range switch is not required, disvharge withstand current measurement function is available at low voltage side, It use precise resistor with good stability to measure high voltage.



Technical specification
  specification
technic parameter
40/460/260/5120/2120/3120/10200/2220/2.5200/10300/2300/3
Rated voltage(KV)406060120120120200220200300300
Rated current(mA)425231022.51023
Rated power(W)16012030024036012004005502000600900
Voltage meter precisionnumber on voltage meter ±(1.0 %reading±0.2KV)
Current meter precisionnumber on current meter ±(1.0 %reading±0.2KV)
Ripple coefficient≤0.5%
Voltage stabilizationstochastic wave ,≤1% when power wave±10%
Overloading abilityoverstep 10% of rated voltage when loading nothing for ten minutes; the biggest charge current can be 1.5 times of rated current
powersingle-phase alternating current power of 50HZ 220V±10%
workingincontinuous use
The time should be no more than 30 minutes when continuously use it
Work conditiontemperature:-10~40ºC
relative humidity:≤85% when room temperature is 25ºC
height above sea level:below1500 meters
capacitancecapacitance of the tested res is absoluteness
Can be charged with 1.5 times of rated current
configurationelectric insulated Voltage Multiplier is made of epoxy FRP(Fiberglass-Reinforced Plastics)
Air insulated,without leak
characteristic of Control boxOne button for high precision of 0.75UDC--1mA(precision≤1.0%)is suit to do zinc oxide lightening arrester test
overvoltage protection use dialing code set,be clear at a glance
International standard box withTwo kind of using way(can be take out from the box for using) makes it easy to use.

Factory
Customized DC High Voltage Generator Hipot Test Set

Application
Customized DC High Voltage Generator Hipot Test Set
FAQ:

1. How can I choose the suitable one?
Please tell us your detailed requirements by mail or online, we will recommend the suitable one as your request.
 
2. Does your price is competitive?
We have our own factory,we make sure to offer you the best quality with competitive price.
 
3. How can I pay?
We accept many payment term, such as T/T, Western Union…
 
4. When I receive it after pay?
Normal models can be delivered with 4-7days, please contact us to check transport time to your address.
 
5. How to deliver?
We can send by Express, by Sea and by Air.
 
7.What should I do if I do not know how to use?
We provide detailed operation instructions, operation videos, and engineer's online technical support.

8.What should I do if some parts broken?
We provide a 12-month warranty period and long-term maintenance services.

Customized DC High Voltage Generator Hipot Test SetCustomized DC High Voltage Generator Hipot Test SetCustomized DC High Voltage Generator Hipot Test SetCustomized DC High Voltage Generator Hipot Test SetCustomized DC High Voltage Generator Hipot Test SetCustomized DC High Voltage Generator Hipot Test Set