The most remarkable feature of the cold water tower is that it does not need electricity, the fan rotates automatically, saves 100% electricity and saves 80% water.

The packing type cold water tower distributes the circulating cooling water that needs to be cooled evenly on the packing. The axial flow fan installed on the top of the tower is driven by the motor to draw the cold air from the surrounding environment into the tower. The cold air and hot water transfer mass and heat on the packing surface to reduce the water temperature.The cold water tower has small contact area between water and air, large air resistance and noise, relatively large energy consumption, high failure rate, large amount of maintenance, high maintenance cost, short service life, high requirements on water quality and unsatisfactory cooling effect.

The cold water tower is a new product of energy saving and consumption reduction. It is a new technological revolution in the refrigeration industry of circulating water.It adopts the patent invented by the company - water jet driven fan rotary atomizer to replace the packing, water distribution device and the top of the tower motor, fan, etc.Driven by the current pressure in the circulating water system, the fan rotates automatically with the counter-thrust of the water spray atomizer, so no electricity is needed, 100% electricity is saved, and the cost of cable, distribution cabinet and control cabinet for controlling the electric fan is saved.

1. Low float rate: The spray device is evenly distributed in the tower, and the air outlet area is about twice that of the traditional tower, so the air outlet speed is low.At the same time, the top of the tower installed with good performance of the water collection device, to minimize the flow of water, removed a large number of water, water saving more than 80% than packed cold water tower.At the same time, it eliminates the potential safety hazard caused by the freezing of the surrounding environment of the cold water tower caused by floating water in winter.

2. Good cooling effect: the hot water in the tower exchanges heat with the incoming air under the fog condition. Due to the small wind resistance in the tower and the reasonable design of air duct and blade, the air-water ratio is increased, the reasonable wind field in the tower, the pressure of steam and less wall flow, etc., the cooling effect of the tower is good.

3. Stable temperature drop: Since the tower adopts the injection principle for cooling, there is no packing blockage or fan damage. The advanced water suspension bearing technology ensures the flexible and reliable rotation of the automatic rotating atomizer of the water injection driving fan, ensuring the long-term stable operation of the tower.

4, no special requirements on water quality, applicability: due to adopt the company patent technology design, atomizing nozzle diameter Φ 10 above, not easy jam, nozzle flow velocity is large, difficult to scale, no special requirements for water quality.There is no packing, not easy to scale, reduce the possibility of blockage.

5, quiet design, low noise: no motor, reducer and other rotating machinery equipment, eliminate the electric fan disturbing noise, so it is especially suitable for hotels, restaurants, hospitals, schools and adjacent residential areas of enterprises and institutions.

6. Simple operation: As long as the circulating water pump works, the product is in working state.

7. Safe to use and easy to maintain: Because there is no electric fan in this product, the occurrence of electrical fire in operation is eliminated;It is safer to use in places with special requirements such as inflammable and explosive;The simple structure makes the maintenance convenient, the operation cost is low, will not occur because of the fan fault shutdown accident.

8. Wide application and flexible combination: This product has a variety of combination units, which can be combined flexibly according to the site.This technology can also be applied to the construction of cooling ponds and the renovation of steel-concrete cold water towers.

9. Light temperature of the tower: reduced the design requirements and installation costs for the base.

10, the cooling water of the tower can adjust: for a given type of cooling tower, with work pressure change (that is, the flow rate change) in and out of the water temperature difference of roughly the same features, therefore increase the pressure of water supply can be used to improve the cooling water of the tower (in the range of allowable spray device), at the same time also can be used to change the nozzle aperture to regulate water flow and temperature drop of the tower.

11. No blockage, no maintenance, stable and reliable operation.A series of phenomena affecting the performance of the tower and the equipment of the process system, such as the packing tower being blocked by impurities in the circulating water and the aging, deformation, brittleness, clogging and flushing of the sprinkler head, the filling being blocked by the crispness sheet, the pipe, the pump and the heat exchanger, etc., were eliminated completely.The trouble of frequent cleaning and changing of packing and distributing sprinkler head is completely eliminated