Slotted wedge wire screens

Description
Slotted wedge wire screen is produced through the method of electric resistance welding: Wires with special profile are welded to supporting wires at 90 degrees angle. Its characteristic features are accurate production and precise gap sizes, which result in the ability to carry heavy loads. The slotted screen is also characterized by low possibility of blanking, perfectly smooth surface and high open surface ratio. As a result of modern technology of welding, different wires may be used, various slots in one wedge wire screen, as well as different distances between supporting wires can be created.
Material
According to the slotted wedge wire screen catalogue ferrite: AISI 430 (1.4016); Austenite: AISI 304 (1.4301), AISI 304L (1.4307), AISI 202 (1.473), AISI 316 (1.4401), AISI 316L (1.4404), AISI 317LN (1.4439), AISI 904L (1.4539), AISI 321 (1.4541), AISI 316Ti (1.4571), Duplex: 329 LN (1.4462), 439 (1.4410); Special: 2.4360, 2.4610, 2.4816
Slot
Standard from 0, 05 mm. Smaller on available on customer`s request.
Support wire
According to the slotted wedge wire screen catalogue - Typ I: 10x3, 10x2, 12x3, 15x3, 18x2, 20x2, 30x2 and special type Q: Q35, Q55
Working wire
According to the slotted wedge wire screen catalogue standard wire - Typ Sb: Sb6, Sb8, Sb12, Sb18, Sb 22, Sb28, Sb34, Sb42, Sb60, Sb70, SbA50 and the special wires type Sbb: Sbb34, Sbb38, Sbb42, Sbb48, Sbb50, Sbb76, 2, 4x5, 3x6, 5.
Dimensions
Max. 3500x4000 mm; Standard work other sizes available on customer`s request.