Products

Model HS6 -21p1z Ball Slewing Bearing No Toothed Four-Point Contact

China Model HS6-21p1z Ball Slewing Bearing No Toothed Four-Point Contact, Find details about China Special Wheel Bearing for Tower Crane, Rotary Table Bearing from Model HS6-21p1z Ball Slewing Bearing No Toothed Four-Point Contact

Model NO.
HS6-21P1Z
Craft
Grinding
Trademark
LYDZC
Transport Package
in Wooden Box
Specification
25.5inch*17inch*2.2inch
Origin
Luoyang China
Model NO.
HS6-21P1Z
Craft
Grinding
Trademark
LYDZC
Transport Package
in Wooden Box
Specification
25.5inch*17inch*2.2inch
Origin
Luoyang China
New model: hs6-21p1z
Inside diameter: 10.0000 mm
Holder and material: F1 carbon steel
Old model: hs6-21p1z
Outer diameter: 12.0000 mm
Column number: single column brand: LYDZC
Weight: 0.000 kg
Purpose: general purpose
Materials: stainless steel AISI440(9Cr18)
Thickness: 16mm
 
LYDZC professional sells hs6-21p1z and provides relevant consulting services for GMN hs6-21p1z customers. Please contact us if you need to know the size, weight, price, installation and maintenance of the GMN hs6-21p1z model.
 
Model HS6-21p1z Ball Slewing Bearing No Toothed Four-Point ContactModel HS6-21p1z Ball Slewing Bearing No Toothed Four-Point ContactModel HS6-21p1z Ball Slewing Bearing No Toothed Four-Point ContactModel HS6-21p1z Ball Slewing Bearing No Toothed Four-Point Contact

Hs6-21p1z USES deep groove raceway internally and USES ball bearings of maximum size, so it can withstand higher torque, thrust and radial load than normal four-point contact ball bearings.
The KAYDON hs6-21p1z has a perfect seal that helps flush out dirt. The ring with teeth is provided with taper hole, and the design of through hole is adopted without teeth.
The HS series bearings have inner tooth type, outer tooth type and non-tooth type.
The gear is designed with involute short teeth, and the pressure Angle is 20 degrees, in line with the AGMA Q5 level accuracy standard.
The KAYDON hs6-21p1z has two grease nozzles with an interval of 180 degrees. For untoothed and inner teeth, the nozzle is located at the outer diameter (Do).
For the external tooth type, the nozzle is located at the internal diameter (di)

 

You Might Also Like