China Mini 4G Network Motorcycle GPS Tracker with Free Tracking Software, Find details about China GPS Tracker, GPS Tracking from Mini 4G Network Motorcycle GPS Tracker with Free Tracking Software
Alerts and some optional functions
* Over speed alert
* Geo-fence alert
* Movement alert
* Power failure/low power alert
* Doors detection (optional)
* Fuel monitoring (optional)
* Engine on/off detection (optional)
* SOS Panic button, SOS alert (optional)
* Accident alarm (need crash sensor support) (optional)
* Wiretapping/remote listening (optional)
* Two way communication (speaker and microphone) (optional)
Items | Specifications |
Dimension | 62*50*22mm |
Weight | 65g |
Input voltage | DC 9V~24V/1.5A |
Back-up battery | 350mAh |
Operating Temperature | -20 degree ~ 75 degree |
Humidity | 5%~95% |
GPS Chip | U-blox7 |
GPS Sensitivity | -165dBm |
Positioning accuracy | 10 meters, 2D RMS |
Interface | 2 Input and 1 Output |
LED | 2 LED lights to show GPS, GSM status |
Button | 1 SOS(optional) and 1 power on/off |
Sensor | Motion sensor |
Work Time | 18 hours in power-saving mode and 4 hours in normal mode |
Packing Measures | |||
Neutral | Dimension (mm) | Weight (KG) | Capacity |
Box | 225x160x55 | 0.28 | 1 set |
Carton | 470x340x310 | 9 | 30 sets |
FAQ
Q: Why the tracker can't be switched on?
A: 1. Check if wiring is correct or not.
2. Charge the tracker.
Q: No response to SMS command
A: 1. Wrong password. Please check your password.
2. No GSM mobile signal or weak GSM network. Try later.
3. Out of SIM credit. Please pop up.
4. SIM is damaged. Change a sim card.
5. SIM card is without sending function. Change a SIM or enable SMS sending function.
6. SIM card isn't installed properly.
Q: Why there is a "Last" appearing in a positon report SMS?
A: There is no GPS signal. Please take the tracker to somewhere open area.
Q: How to use tracking platform?
A: 1. Set GPRS parameter in Parameter.exe.
2. Set GPRS parameter by SMS.
(1) Set tracker ID: W<password>,010,ID
(2) Set APN: W<password>,011,APN name
(3) Set IP and Port: W<password>,012,210.209.68,9600
(4) Enable GPRS: W<password>,013,1
(5) Set report time interval: W<password>,0.14,00000
Q: How to connect Relay to cut off engine?
A: Cut off fuel pump wire, connect green wire of relay with fuel pump line, connect yellow wire with relay yellow wire, connect white wire with 12V power supply line.
Inquiry now !