Products

Light Corrugated Ceramic Packing Ceramic Structured Packing for Tower

China Light Corrugated Ceramic Packing Ceramic Structured Packing for Tower, Find details about China 125y Ceramic Structured Packing, Rto Ceramic Structured Packing from Light Corrugated Ceramic Packing Ceramic Structured Packing for Tower

Model NO.
BS-CSP
Trademark
Bestn
Transport Package
Plastic Woen Bag, Carton Box, Wooden Box, etc
Specification
220*100*7.0mm
Origin
Jiangxi
HS Code
6909110000
Model NO.
BS-CSP
Trademark
Bestn
Transport Package
Plastic Woen Bag, Carton Box, Wooden Box, etc
Specification
220*100*7.0mm
Origin
Jiangxi
HS Code
6909110000
Light Corrugated Ceramic Packing Ceramic Structured Packing for Tower
  • Corrugated sheets placed in parallel form cylindrical units
  • Form of highly efficient with separating efficiency several times higher than that of loose packing
  • Low-pressure drop, increased operating elasticity, minimum amplifying effect and maximum liquid treatment compared to loose tower packing
  • High capacity
  • New tower design may reduce diameter, while renovate old towers may increase capacity significantly
  • Rectifying and absorbing some corrosive mixtures, which are definitely regulated in pressure drop and theoretic plate number
Examples of successful application:
1. Vacuum to or below 1 mbar, separation of aromatic chlorides, esters, hydrocarbons and other highly temperature sensitive material isomers.
2.  Regeneration of organic solvent  of pollution of HCl / sulfate / nitrate / three hydride  and etc.
 
TypeSurface aream2/m3Void %Bulk density(kg/m3)hydraulic diameter(mm)theoretical plates1/mangle of inclinationMax.F factorm/s(kg/m3)Pressure drop(mm)
700Y70072650-68055452.34.8
500Y50075600-6507.57452.14.6
450Y45075520-55074451.8-2.04.5
400Y40076500-52082.8-3.2452.0-2.23.5
350Y35078480-520103.0-4.0452.2-2.62.5
250Y25082420-45011.0±0.52.5-2.8452.6-2.82.5
160Y16086350-38015.0±0.52452.8-3.02.8
125Y12587300-35028.0±0.51.7453.0-3.23
 
 
Chemical component
 
ComponentSiO2Al2O3Fe2O3CaOMgOK2O+Na2OTiO2Burning loss
Content68-7521-25≤0.5≤1.0≤1.0≤3.9≤0.05≤5.0
Test method standardQB/T2578-2002
 
ItemsIndexItemsIndec
 Resistance≥99.9%Thermal deformation temperature1350ºC
Alkali resistance≥90%Water Absorption<0.5%
Density2.35-2.5 g/cm3 Material compressive strength ≥130MPa
Pressure density≥20kg/cm2 refractoriness under load 1280ºC(0.2MPa)
Moh's hardness≥7 operating temperature -30-1000ºC
test method standard   HG/T3210-2002,GB/T7322-2007,GB/T4738.2-84

 
Detailed description of each type of product
 
1. 700Y,500Y
 
The filler has low resistance, high efficiency, large separation capacity, and can replace other fillers or partial plate towers under certain conditions.

Product Features:
a. Large specific surface area and large porosity;
b. The gas phase passage has a small inclination angle, regularity and pressure reduction;
c. Radial diffusion is good and gas contact is sufficient.

Applicable occasions:
500Y (X): vacuum rectification which is heat sensitive and difficult to separate, especially vacuum distillation with a pressure less than 7 KPa, atmospheric distillation.
700Y (X): separation of isotopic mixtures, isomeric mixtures.
 
2. 450Y,450X
 
It is used for precision fractionation with high requirements on the mass transfer efficiency of the tower. It is especially suitable for chemical production processes such as acetic, and styrene, and separation of high-purity fine chemical products. The adaptation conditions are roughly as follows:

Gas phase load factor, F=1.5~3(m/s)[Kg.m3]1/2Minimum liquid load, L (spray density) ≥ 2m3 / m2.h
 
3. 350Y,300Y,250Y
 
The product combines the two main properties of pressure drop and efficiency in the mass transfer process. Especially suitable for atmospheric pressure in the refining process.

Distillation and low pressure fractionation columns, such as catalytic cracking, catalytic cracking, hydrocracking, hydrorefining, coking, catalytic reforming, etc. Separation of products in light hydrocarbon processing such as MTBE, isomerization, alkylation, gas fractionation, etc. The product separation of the device is also applicable to the separation of chemical products such as ethylbenzene and styrene and the absorption tower of Mass transfer efficiency can reach 2-4 theoretical plates / m packing, pressure drop 1-5mmhg / m filler.
 

Light Corrugated Ceramic Packing Ceramic Structured Packing for Tower

Light Corrugated Ceramic Packing Ceramic Structured Packing for Tower
 

You Might Also Like