SCM2 Series Two Stages Centrifugal Pumps

The SCM2 series are with two impellers back to back. Because of two impeller to gain energy, it is an obvious choice that there is need for high head values but if hard to reach with single impeller centrifugal pumps. Suitable for civil and industrial uses to pump clean water and chemically non-aggressive liquid. Particularly be used for increasing the supply pressure, feeding boilers and loading extremely.

APPLICATION

A. 14 yerars experience of manufacturing water pump.
B. All of our products are with CE approved(EMC and LVD).
1. The pump have a compact size and simple to use.
2. Heavy duty continuous work.
3. Ambient temperature up to 40º C.
4. The thermal protector is installed if required.
5. The shaft is 45# steel or stainless steel and not easy to rust.
6.220-240V 50Hz power which is safer for your using.
7. The stator is 100% copper wire with high quality.

OPERATING CONDITION

1. Liquid temperature up to 60
2. Ambient temper up to 40
3. Total suction lift to 9m
4. Continuous duty

CONSTRUCT

PUMP

Pump body: Cast Iron
Impeller: Brass
Mechanical seal: Carbon/ceramic/Stainless Steel

MOTOR

Single Phase
Heavy Duty Continuous Work
Motor Housing: Aluminum
Shaft: Carbon Steel/ Stainless steel
Insulation class: B and F
Protection class: IP44 or IP54
Cooling: Externally ventilation

TECHNICAL DATA(220-240V/50Hz)