China Sewage Flow Meter, Electromagnetic Flow Meter, Find details about China Sewage Flow Meter, Electromagnetic Flow Meter from Sewage Flow Meter, Electromagnetic Flow Meter
Measured Medium | Acid, alkali, sea water etc strong corrosive or unpurified all conductive liquid |
Range/Flow rate | 0.14 to 25434 m3/h; 0.5 to 10m/s |
Diameter(mm) | Pipe type F4/PTFE liner : DN10-DN600; Pipe type Rubber liner : DN40-DN2000 |
Flow Direction | Forward, backward, net flow |
Accuracy/Repeatability | Accuracy ±0.2% Accuracy ±0.5%, Repeatability:≤ 0.1% Accuracy ±1.0% Repeatability: ≤0.2% |
Range ratio | 150:1 |
Measured Medium Temperature | Rubber liner: -20ºC~ +60ºC; High temperature rubber linner: -20ºC~ +90ºC PTFE liner: -30ºC~+120ºC; High temperature PFTE liner: -20ºC~+160ºC |
Rated Working Pressure | DN10-DN50 ≤ 4MPa; DN65-DN200 ≤ 1.6MPa DN250-DN1000 ≤ 1MPa; DN1200-DN2000 ≤ 0.6MPa |
Signal Output | 4-20mA(Load Resistor 0-7500Ω) , Pulse/frequency,Control level, |
Communication Output | RS485 MODBUS communication, HART protocol, MODBUS protocol. |
Power Supply | 220V AC ±15%, or 24V DC, Ripple≤5% |
Process Connection | Flange connection |
Explosion -proof class | Exd[ia]iaqIICT5 |
Protection class | IP65; IP68 for separate model with converter, can be submergible |
Environment Temperature | -25ºC~ +60ºC |
Relative Humidity | 5%-95% |
Power Consumption | Less than 20W |
Liner Material | Mark | Temperature | Suitable Liquid | Suitable DN |
Rubber | CR | <60ºC | Tap water, industrial water, sea water | DN50-2000 |
PU | <60ºC | Pulp, Ore slurry or other slurry | DN25-500 | |
F4(PTEP) | <120ºC | Strong corrosive Acid ,Alkali ,Salt liquid | DN25-1600 | |
Fluorine plastic | F46(FEP) | <120ºC | Corrosive Acid ,Alkali ,Salt liquid | DN10-200 |
PFA | <160ºC | Corrosive Acid ,Alkali ,Salt liquid | DN10-300 |
| Model Suffix Code | Description | |||||||||
| LDG‐ | ||||||||||
| Diameter | Four Digitals; for example: 0010: 10 mm; 0015: 15mm; 0100: 100 mm 1000: 1000mm | |||||||||
| Transmitter | S | Compact type | ||||||||
| L | Remote type | |||||||||
| Electrode Material | M | Stainless steel 316L | ||||||||
| T | Titanium | |||||||||
| D | Tantalum | |||||||||
| H | Hastelloy Alloy C | |||||||||
| Signal Output | 0 | No output | ||||||||
| 1 | 4‐20mA/1‐5KHz | |||||||||
| Liner material | X | Hard Rubber | ||||||||
| P | Polyurethane | |||||||||
| F4 | F46 | |||||||||
| Pr | Propylene oxide | |||||||||
| F | PTFE | |||||||||
| Power Supply | ‐0 | 110‐240Vac | ||||||||
| ‐1 | 20‐36V DC | |||||||||
| ‐2 | Battery Power Supply | |||||||||
| Communication | 0 | No communication | ||||||||
| 1 | RS485 | |||||||||
| 2 | MODBUS | |||||||||
| Grounding Ring | 0 | No grounding ring | ||||||||
| 1 | Grounding ring | |||||||||
| 2 | Grounding Electrode | |||||||||
| Connection | ‐DXX | DXX: D06, D10, D16, D25, D40 D06: DIN PN6; D10: DIN PN10 D16: DIN PN16; D25: DIN PN25 D40: DIN PN40 | ||||||||
| ‐AX | AX: A1, A3, A6 A1: ANSI 150#; A3: ANSI 300# A6: ANSI 600# | |||||||||
| ‐JX | JX: J1, J2, J4 J1: JIS 10K; J2: JIS 20K; J4: JIS 40K | |||||||||
| ‐WF | Wafer Connection (Available for DN2.5; DN6 Flow Meter) Body material: Stainless Steel | |||||||||
| ‐TR | Tri‐Clamp for sanitary Type (Body material: Stainless Steel) | |||||||||