China High Quality ETFE Resin Hr930 ETFE Hr907 Fluon ETFE Pellets, Find details about China ETFE Resin, ETFE Pellet from High Quality ETFE Resin Hr930 ETFE Hr907 Fluon ETFE Pellets
Index name | 1 | 2 | 3 | |
Physical Performance | Specific Gravity (g/CM3) | 1.73~1.79 | 1.73~1.79 | 1.73~1.79 |
Melting Flow Rate(g/10min) | 20-30 | 8-10 | 15-30 | |
Melting Point (ºC) | 265±5 | 265±5 | 265±5 | |
Mechanical Performance | Tensile Strength (MPa) | 25-45 | 25-45 | 25-45 |
Breaking Extension (%) | 200-350 | 200-350 | 200-350 | |
Compression Intensity (MPa) | 20-40 | 20-40 | 20-40 | |
Shore Hardness | 60 | 60 | 60 | |
Coefficient of Kinetic Friction | 0.4 | 0.4 | 0.4 | |
Thermal Performance | Maximal Temperature of Continuous Work (ºC) | 180 | 180 | 180 |
Thermal Distortion Temperature (ºC) (1.82MPa) | 74 | 74 | 74 | |
Coefficient of Linear Expansion *105 (K-1) | 9.0 | 9.0 | 9.0 | |
Electrical Performance | Volume Resistivity (Ω·CM) | >1017 | >1017 | >1017 |
Insulation Breakdown Voltage (3.2mm) | 16 | 16 | 16 | |
Relative Dielectric Constant (1KHz) | 2.4-2.6 | 2.4-2.6 | 2.4-2.6 | |
Dielectric Loss Angle Tangent Value (tanδ) (X106Hz) | <0.0005 | <0.0005 | <0.0005 |
Product application
ETFE is widely used in chemical industry, electronic communication, equipment manufacturing, aerospace and other fields.
Pumps, valves and pipes, plates lining, fillers, film, fiber, wire sheath insulating layer etc, especially ETFE film material in all walks of life.
suitable for electronic industrial use high-temperature wire and cable, high-frequency electric equipment transmission lines, installation line, electronic computer wire insulation, national defense industry by air pump, oil deposits detection and wire cable, metallurgy and architectural fireproof wires and cables.
Attention
1). Packing in double layers polyethylene plastic bag, again into paper barrel. Each piece of 25kgs net each
2). Onto dry in the warehouse storage, storage warehouse and transportation process should keep clear auspicious, dry, presenting mixed impurity; You should avoid strenuous vibration and sunlight and rain, defend packing damage. To ensure that aggregates cleanness and products quality, the ban on the use of hand.
3). This product should avoid under processing more than 370C, use, prevent toxic gases scattered.