Cantilever Cable Single Stranding Machine/Cable Making Machine for Network Cable

China Cantilever Cable Single Stranding Machine/Cable Making Machine for Network Cable, Find details about China RJ45 Stranding Machine, Cable Making Machine from Cantilever Cable Single Stranding Machine/Cable Making Machine for Network Cable

Basic Info.

Model NO.

ZH-800ST

Motor

Siemens

Inverter

Siemens

Bearing

NSK, NACHI

Main Electrical Elements

Siemens, Omorn, Schneider

Factory Location

Between Jiangsu and Zhejiang Prov.

Trademark

Specification

Origin

Dongguan, China

HS Code

8477900000

Model NO.

ZH-800ST

Motor

Siemens

Inverter

Siemens

Bearing

NSK, NACHI

Main Electrical Elements

Siemens, Omorn, Schneider

Factory Location

Between Jiangsu and Zhejiang Prov.

Trademark

Specification

Origin

Dongguan, China

HS Code

8477900000

Product Desciption

Cantilever Cable Single Stranding Machine/Cable Making Machine for Network Cable

Features of wire cable twisting machine

Main machine work with active pay off and servo-driving traction, complete four pairs core wire twisting with framework.
Pitch stable, steady tension, main machine totally closed for protection high speed and safety.

Configuration specification of wire cable twisting machine

1, Motorize pay-off (total in 5)
1)Motive power: each motorize pay-off equipped a 0.75HP motor, matching with Inovance vector inverter control;
2)Loading way: horizontal paying-off, shaftless type bobbin position core wire, manual glide tip cone;
3)Transmission: synchronous belt to transmitting, transmitting stable and accuracy, reaction sensitive;
4)Tension: oscillating tension feedback linkaged, a scale with heavy displacement adjusts the size of tension.
5) Linkage control: displacement transducer induction, linkage feedback;
6)Guide wheel: φ120 tension aluminum wheel, spray coating ceramics on surface;
7) Pay-off bobbin:Double head paying-off: φ500 (outer diameter)* φ56 (inner bore)*300mm (outer width) plastic plate (confirm by diagram);
8)Single head pay-off: φ630 (outer diameter)* φ80 (inner bore)*475mm (outer width) plastic plate (confirm by diagram)

2, F hauling machine (servo motor)*1 set
1)Motive power: Inovance servo motor, equipped with servo controller;
2) φ400 aluminum wheel decelerate hauling, synchronous belt transmitting power;
3) Air-operated arc shaped belt pressure hauling, wear proof cowhide belt ribbon hauling-off wheel, maintain tension unified;
4)Four groove rotate wire for meter counting, tachometer wheel; the height of overall unit 150mm lower, width add 50mm, remain paying-off for bore a hole;
5)Matching two positioning mould of wire moldboard, one positioning mould of wire's mould base, the centre of positioning mould wire match with adjustable cross-shaped paying-off positioning mould;
Cantilever Cable Single Stranding Machine/Cable Making Machine for Network Cable

3, Vertical wrapping frame:  *1 set
1)Wheel type magnetic powder tension adjusting, the tension of wrapping is adjustable during the operation;
2)Oscillating arm type tape tension, multi-angle adjustable with rotary drum;
3)Wrapping reel max:  φ350*30 width; inner bore: φ50;

4, ¢800 DC single twisting machine  *1 set
1)Motive power: main motor Z4-15kw DC motor, taking-up Z4-11kw DC motor, traversing 2HP 1:15 AC motor made in Taiwan, inverter by Inovance, DC controller by Eurotherm (made in UK)
2)Main cantilever rotating speed max: 650rpm; traverse guide wheel broaden, wire thread avoid scratch;
3)All import high strength synchronous belt drive, all bearing are use Japan Koyo or NACHI
4)Suit for wire coilφ800 (outer diameter)* φ80 (inner bore)*600mm (outer width) (confirm by diagram)
5)The scope of lay is 50-400mm (needs to provide lay scope and wrapping width);
6)The maximum wire diameter after cabling isφ8mm;
7)The height of inlet wire shaft centre: 940mm;
8)Air-operating braking brake;
9)Set a stopping brake air-operating device at the inlet wire;
10) pitch setting: touch-screen operation, PLC programming, computer automatic tracking correction, pitch error less than 2%, Pitch error can amended at any time;
11)The frame of machine is made by steel plate and rectangular steel welding, draw-off caterpillar treatment, high accuracy boring mill processing, boring complete, with non-deforming and high accuracy feature;
12)Machine appearance dimensions: L * W * H (3350 * 1670 * 1725) mm.

5, PLC control cabinet *  1 set
1)Independent electrical equipment operation standard control cabinet;
2)Operation panel is 10.4 color man machine interface touch screen;
3)Mitsubishi PLC programming automatic control pitch;
4)Provide with security door lock switch, lifting reel platen limit switch;
5)Braking resistor provide by Taiwan
6)Air-operating electromagnetic control dual units brake stopper;
7)Imported high-precision encoder provide by Japan;
8)With traverse inching function for easy loading and unloading reel;
9)Set reel manual reversed, easy to change reel and joining wire ;
10)wire reel loading and unloading with a hydraulic lift, electric operation;
11)Inverter provides by Shenzhen Inovance, electrical appliances control all use the imported brands;
12)Voltage is 380V, three-phase four-wire, allowing voltage within 380V ± 5%.

6, Inclination platen *1 unit
   Slope type rotary platen, easy to reel pass in and out of the machine.
Cantilever Cable Single Stranding Machine/Cable Making Machine for Network Cable