Selectable Tmc 24X24X22.5 Cm China Fiberglass Manhole Fuel Dispenser Flowmeter
Selectable Tmc 24X24X22.5 Cm China Fiberglass Manhole Fuel Dispenser Flowmeter, Find details about China Flowmeter, Fuel Dispenser Flowmeter from Selectable Tmc 24X24X22.5 Cm China Fiberglass Manhole Fuel Dispenser Flowmeter
Basic Info.
Model NO.
FM-1
Pressure Loss
0,027MPa ( 40L/Min)
Temperature
-25~40ºC
Trademark
TMC
Transport Package
Selectable
Specification
24X24X22.5 cm
Origin
China
Model NO.
FM-1
Pressure Loss
0,027MPa ( 40L/Min)
Temperature
-25~40ºC
Trademark
TMC
Transport Package
Selectable
Specification
24X24X22.5 cm
Origin
China
Product Desciption
TMC High Quality Stable and accurate fuel dispenser flowmeter
The flow measurement of the fuel dispenser uses a fixed small volume to repeatedly measure the volume of fluid passing through the flowmeter. Therefore, there must be a standard volume of space inside the positive displacement flowmeter, which is usually called the "metering space" or "metering room" of the positive displacement flowmeter. This space is constituted by the inner wall of the instrument case and the rotating parts of the flowmeter.
The working principle of the fuel dispenser flow meter is: fluid passing through the flow meter will produce a certain pressure difference between the inlet and outlet of the flow meter. The rotating part of the flowmeter (referred to as the rotor) rotates under this pressure difference and discharges the fluid from the inlet to the outlet. In this process, the fluid fills the "metering space" of the flowmeter again and again, and then is continuously sent to the outlet. Under the conditions of a given flowmeter, the volume of the measuring space is determined, as long as the number of rotations of the rotor is measured. The cumulative value of the volume of fluid passing through the flowmeter can be obtained.
The flow measurement of the fuel dispenser uses a fixed small volume to repeatedly measure the volume of fluid passing through the flowmeter. Therefore, there must be a standard volume of space inside the positive displacement flowmeter, which is usually called the "metering space" or "metering room" of the positive displacement flowmeter. This space is constituted by the inner wall of the instrument case and the rotating parts of the flowmeter.
The working principle of the fuel dispenser flow meter is: fluid passing through the flow meter will produce a certain pressure difference between the inlet and outlet of the flow meter. The rotating part of the flowmeter (referred to as the rotor) rotates under this pressure difference and discharges the fluid from the inlet to the outlet. In this process, the fluid fills the "metering space" of the flowmeter again and again, and then is continuously sent to the outlet. Under the conditions of a given flowmeter, the volume of the measuring space is determined, as long as the number of rotations of the rotor is measured. The cumulative value of the volume of fluid passing through the flowmeter can be obtained.
You Might Also Like
FDA Approved Lemborexant Sleep-Wake Disorders and Insomnia D......
Dmr Digital Two-Way Radio, UHF/VHF, Compatible with Mototrbo......
Multifunctional Shr Opt/RF Hair Removel Elight Birth Mark Re......
Air Lift D2300 2300lbs Rubber Air Spring Bag for Car Truck A......
Hot Feed Rubber Extruder with Ce
Single Girder Gantry Crane with Factory Price
D2w6y Cheap Manual Home Used ABS Crank Hospital Foldaway Bed
Old Style Wooden Treasure Box with Brass Latch Woodcraft
Arena PARA Gatos for Toilet Bentonite Cat Sand Pet Supply
Women A Line Short Knee Length Tutu Tulle Prom Party Skirt
G Single Screw Progressive Cavity Pump Self-Priming Slurry P......
700ml Round Shape Spirits Vodka Whisky Brandy Glass Bottle