5~90L New Tmc Selectable 24X24X22.5 Cm China Fuel Pump Flowmeter
5~90L New Tmc Selectable 24X24X22.5 Cm China Fuel Pump Flowmeter, Find details about China Flowmeter, Fuel Dispenser Flowmeter from 5~90L New Tmc Selectable 24X24X22.5 Cm China Fuel Pump Flowmeter
Basic Info.
Model NO.
FM-1
Pressure Loss
0,027MPa ( 40L/Min)
Temperature
-25~40ºC
Trademark
TMC
Transport Package
Selectable
Specification
24X24X22.5 cm
Origin
China
Model NO.
FM-1
Pressure Loss
0,027MPa ( 40L/Min)
Temperature
-25~40ºC
Trademark
TMC
Transport Package
Selectable
Specification
24X24X22.5 cm
Origin
China
Product Desciption
TMC High Quality Stable and accurate fuel dispenser flowmeter
The flow measurement of the fuel dispenser uses a fixed small volume to repeatedly measure the volume of fluid passing through the flowmeter. Therefore, there must be a standard volume of space inside the positive displacement flowmeter, which is usually called the "metering space" or "metering room" of the positive displacement flowmeter. This space is constituted by the inner wall of the instrument case and the rotating parts of the flowmeter.
The working principle of the fuel dispenser flow meter is: fluid passing through the flow meter will produce a certain pressure difference between the inlet and outlet of the flow meter. The rotating part of the flowmeter (referred to as the rotor) rotates under this pressure difference and discharges the fluid from the inlet to the outlet. In this process, the fluid fills the "metering space" of the flowmeter again and again, and then is continuously sent to the outlet. Under the conditions of a given flowmeter, the volume of the measuring space is determined, as long as the number of rotations of the rotor is measured. The cumulative value of the volume of fluid passing through the flowmeter can be obtained.
The flow measurement of the fuel dispenser uses a fixed small volume to repeatedly measure the volume of fluid passing through the flowmeter. Therefore, there must be a standard volume of space inside the positive displacement flowmeter, which is usually called the "metering space" or "metering room" of the positive displacement flowmeter. This space is constituted by the inner wall of the instrument case and the rotating parts of the flowmeter.
The working principle of the fuel dispenser flow meter is: fluid passing through the flow meter will produce a certain pressure difference between the inlet and outlet of the flow meter. The rotating part of the flowmeter (referred to as the rotor) rotates under this pressure difference and discharges the fluid from the inlet to the outlet. In this process, the fluid fills the "metering space" of the flowmeter again and again, and then is continuously sent to the outlet. Under the conditions of a given flowmeter, the volume of the measuring space is determined, as long as the number of rotations of the rotor is measured. The cumulative value of the volume of fluid passing through the flowmeter can be obtained.
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover