Basic Info.

Model NO.

TL204W

Model NO.

TL204W

Product Desciption

  
 

TL203W
Technical Specification:


Brief Introduction:
TL203W  is a high-efficiency LHD designed for narrow tunnels.The fully loaded bucket size is 2m3.The load capacity is 4-4.5t.Reasonable system layout, quite compact body design,small turning radius,powerful drive,high ore removal efficiency.We've made many technical improvements on power system, drivetrain system and control system, therefore this model is quite suitable for ore removal from small size narrow tunnel mines.
Design Optimization:

 

1. High efficiency of ore removal

1. Under condition of stress optimization of boom structure,without any alteration of vehicle's overall dimensions,adjustment has been made for boom material and welding technology, so to make the stress more rationalized.
2. Bucket optimization, without any alteration of vehicle's overall dimensions, has increased the bucket's loading efficiency.

1. Flexible and convenient operation

1. Hydraulic control of working and steering make the working and steering operations more convenient and flexible.
2. Electrical controlled transmission and electrical control handle shifting make controllability of shifting increased.

3, Powerful Drive

1. Powered by air-cooled Deutz diesel engine F6L914 with more powerful drive.
2. 32000 series transmission and C270 series torque inverter, highly increase power match.

 

Detailed Parameter and Configure:

 

1. Outer Dimensions:

(Pls check attached drawing 1 and 2 as detailed parameter)

1. Weight Parameter:

Loading capacity	3600Kg
Vehicle empty load	1 2500Kg
Operation weight when fully loaded	161000Kg

 

1. Working Device System:

Hoisting cylinder	Dia.80mm	1 unit
Lifting time	3.8s
Dumping cylinder	Dia.80mm	1 unit
Dumping time	5.6s

 

1. Transmission

DANA R32425 power gear shift transmission with imported handle shift of electrical control ,four gears each for forwarding and backwarding.

1. Torque Converter

DANA C272 torque converter.

1. Axle

Front axle:Heavy-duty rigidity axle,Dana14D or Kesseler D71 ,with standared differential installed internally. With big reduction ratio and high load bearing strength.
       Rear axle:Heavy-duty rigidity axle, Dana 14D or D71 ,with no-spin differential installed internally. With big reduction ratio and high load bearing strength.
         Axle braking:Adopting  international used POSI-STOP brake,spring applies the brake,hydraulic release,to ensure the safe and reliable performance of brake.
        Brake cooling of axle:Hydraulic oil
            forced cooling.

1. Braking System

Adopting Moic's short oil braking system. Under condition of flameout of engine and vehicle's power-failed,brake could be still performed with safety and reliability.

1. Electrical System

DC 24V electrical voltage system. Non-maintaining battery is used to reduce the battery volume and reduce the workload for maintenance.Air-conditioning switch specially designed for imported vehicles is also applied to ensure the circuit is tripped safely in time when short circuit occurs.
Negative wire is connected in switch box to protect the stability of electrical wiring.

1. Tyre

12.00R-24,smooth tread tyre specially for underground mining equipments(This item could be customized according to clients' requirement)

1. Control System

The cabin seat is arranged on hinge position, this design has taken full consideration of operator's field of view during driving.
The cabin comply with the ISO ROPS/FOPS certifications of underground special vehicles.

1. Hydraulic system

It is composed of work steering system and brake cooling system. Main pump and main valve are from mature product of Parker. The pilot system adopts Rexroth products. Filter system uses Donaldson's filter assembly.
Working system applies duplex pump, while braking system uses single pump, both of them are of Parker brand.

1. Oil Tank

Volume of fuel tank is 148L.
Volume of hydraulic oil tank is 144L

1. Steering System

Steering system is pilot operated control system, single oil cylinder for steering.

1. Exhaust System

CANADA ECS tail gas treatment system.

1. Others

Applied centralized lubrication system with easy maintenance.
(Automatic centralized system for option)
Equip with fire extinguisher system
(Automatic fire extinguisher system for option)