Torch High Power Laser Conveyor Vacuum Furnace V8l with Low Price in China

Technical Data of Vacuum Reflow Soldering System V8:

1. Significantly reduce the welding bubbles in the solder, making the void rate as low as 1-2%.

2. Improve the electrical performance of the product and the welding joints, effectively improving the reliability of the welding point and the welding quality.

3. It can be used for double-sided welding of PCB, suitable for mass production, and can be continuously put into the production line. The production cycle is controlled at an average of 30-60S.

4. The degree of vacuum, vacuum holding time, deflation time, vacuum rate, etc. can be set freely.

5. The circuit board with aluminum heat sink can be welded.

6. Low power consumption and high heat insulation design based on the concept of environmental protection. The case temperature does not exceed 40 degrees.

7. High-efficiency and large-capacity flux recovery device.

8. Use integrated oxygen sensor technology to ensure precise control of oxygen content, and real-time/continuous monitoring of residual oxygen content in the furnace.

9. The equipment can be used as an ordinary nitrogen or air furnace at the same time.

Technical Data of Vacuum Furnace V8L