Products

2b50 Aluminum Alloy Sheet Profile Forging

China 2b50 Aluminum Alloy Sheet Profile Forging, Find details about China 2b50 Aluminum Alloy Sheet Profile Forging, 2b50 Aluminum Alloy Sheet from 2b50 Aluminum Alloy Sheet Profile Forging

Model NO.
2B50
Surface Treatment
Enameled Wire
Alloy
Alloy
Elongation
More Than 10%
Trademark
Chalco Aluminum
Transport Package
Export Standard Wooden Pallet
Specification
According to Customer Requirement
Origin
Henan China
HS Code
7606125900
Model NO.
2B50
Surface Treatment
Enameled Wire
Alloy
Alloy
Elongation
More Than 10%
Trademark
Chalco Aluminum
Transport Package
Export Standard Wooden Pallet
Specification
According to Customer Requirement
Origin
Henan China
HS Code
7606125900
 
 
 
2B50 Aluminum Alloy sheet profile forging

  
Chemical Composition of 2B50
AlloySiFeCuMnMgCrNiZnTiZrOthersAl
EachTotal
2B500.7~1.20.701.8~2.60.4~0.80.4~0.80.01~0.200.100.300.02~0.10-0.050.15Remainder
 
AlloyAlloy seriesMean features
2B50Al-Cu-MnThe alloy is heat-treated with heat treatment, and the Al-Cu-Mg-Si is a heat treated aluminum alloy. The chemical composition of the alloy is equal to that of 2A50, and the properties of all kinds are basically the same. It has high plasticity in hot state, forging and forging temperature at 420~470 ºC. The alloy is used to make jet engine complex forging parts, such as compressor impeller, impeller and impeller.
 
Technical standardd/mmRm /MpaA5/%
Not less than
HB 5202≤2236512
23~16037510
161~2403658
 
Technical StandardTypeLLTSTHBS
Rm/MpaRp0.2/MpaA5/%Rm/MpaRp0.2/MpaA5/%Rm/MpaA5/%
GJB 2351Free forgings365-8.0345-6.03354.095
Die forgings38027510.03652457.03455.0100
HB 5204Free forgings365-9.0345-6.03354.095
Die forgings38027511.03652457.03455.0100
 
Typical room temperature mechanical properties of aluminum alloy impeller die forgings of 2B50 T6
Test DirectionTension strength Rm9(Mpa)Yield strength RP0.2(Mpa)A/%
MinimumMaximumMinimumMaximum
L(longitudinal)38047028039017.1
LT(Long transverse)38046527538015.3
ST(Short transverse)38545028037013.7


 
 
2b50 Aluminum Alloy Sheet Profile Forging2b50 Aluminum Alloy Sheet Profile Forging2b50 Aluminum Alloy Sheet Profile Forging2b50 Aluminum Alloy Sheet Profile Forging2b50 Aluminum Alloy Sheet Profile Forging2b50 Aluminum Alloy Sheet Profile Forging2b50 Aluminum Alloy Sheet Profile Forging2b50 Aluminum Alloy Sheet Profile Forging2b50 Aluminum Alloy Sheet Profile Forging

You Might Also Like