Products

60Hz Wound Rotor Slip Ring Motor Ball Mill Motor

China 60Hz Wound Rotor Slip Ring Motor Ball Mill Motor, Find details about China Jr Motor, Wound Rotor Motor from 60Hz Wound Rotor Slip Ring Motor Ball Mill Motor

Model NO.
Jr139-6-480kw
Number of Poles
8
Starting Mode
Serial Rotor Resistance Starting
Certification
ISO9001, CCC, Ce
Brand
China Mtoor
Protection
IP23
Voltage
380V/415V/660V/3kv/6kv/10kv
Nsulation Class
F
Stator Winding
100%Red Copper
Driving
Ball Mill,Steel Rolling Mill,Sugar Rolling Mill
Cooling Method
IC01
Rotor Winding
100%Red Copper
Advantage
Strong Ability for Instantaneous Overload
Frequency
50Hz/60Hz
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Model NO.
Jr139-6-480kw
Number of Poles
8
Starting Mode
Serial Rotor Resistance Starting
Certification
ISO9001, CCC, Ce
Brand
China Mtoor
Protection
IP23
Voltage
380V/415V/660V/3kv/6kv/10kv
Nsulation Class
F
Stator Winding
100%Red Copper
Driving
Ball Mill,Steel Rolling Mill,Sugar Rolling Mill
Cooling Method
IC01
Rotor Winding
100%Red Copper
Advantage
Strong Ability for Instantaneous Overload
Frequency
50Hz/60Hz
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
60Hz Wound Rotor Slip Ring Motor Ball Mill Motor
The JR winding slip ring motor is designed for use with ball mills. This type of motor optimizes the product structure and is a new product that improves process design, maximizing the use of mill equipment.
The mechanical strength of the JR series ball mill motor winding is high, which improves the insulation level of the motor. The slip ring and carbon brush device of the motor are placed outside the end cover, which can effectively prevent the carbon dust from contaminating the coil, and at the same time, it is also easy to replace and repair. In the manufacturing process, the power frequency to ground test of the power pulse tester was carried out several times. The stator and rotor windings were made of Class F insulation varnish and cured by high temperature drying. The insulation performance of the motor was stable and reliable.
60Hz Wound Rotor Slip Ring Motor Ball Mill Motor
Motor power range: 95KW-780KW
Rated voltage: 380V/415V/660V/690V/3000V/33000V/6000V/10000V
Number of poles: 6/8/10/12
Rated frequency: 50Hz/60Hz
Protection level: IP23
Cooling method: IC01
Working system: S1
Insulation class: F
Wiring method: △
Installation method: B3 (horizontal installation)
Ambient temperature: ≥ -15 ° C and ≤ 40 ° C
The deviation of the rated voltage of the JR ball mill motor does not exceed 5%, the allowable deviation of the frequency is 1%, and the sum of the absolute values of the deviations does not exceed 5%.
60Hz Wound Rotor Slip Ring Motor Ball Mill Motor
JR ball mill motor adopts rotor string resistance full-voltage start-up, which has the advantages of small starting current, large starting torque, high efficiency, low noise, low vibration, good ventilation performance, reliable operation and convenient installation and maintenance.
60Hz Wound Rotor Slip Ring Motor Ball Mill Motor
60Hz Wound Rotor Slip Ring Motor Ball Mill Motor
1. The outer packaging of the products are all standard export-oriented wooden plywood packaging.
2, the product packaging is protected by moisture, water plastic soft packaging
3. For products with special transportation requirements (such as temperature, fragile, variability, and easy to get wet), the packaging protection measures will be strengthened, and the target mark will be printed on the package.
4. There are obvious signs and symbols on the packing box that must be paid attention to during transportation and storage (such as position, moisture, rain, shockproof, lifting position, etc.).
60Hz Wound Rotor Slip Ring Motor Ball Mill Motor
60Hz Wound Rotor Slip Ring Motor Ball Mill Motor
There are many types of motor products manufactured and sold by our company. The main products are high- and low-voltage three-phase asynchronous motors. The motor structure types include squirrel-cage type and winding type. Among them, high-voltage synchronous motors mainly support air compressors and mine ball mill equipment. use. We adhere to the service tenet of "focus on products, service with heart" and provide high-quality motor products to customers.
60Hz Wound Rotor Slip Ring Motor Ball Mill Motor
60Hz Wound Rotor Slip Ring Motor Ball Mill Motor
The motor products manufactured and sold by our company are used in many industries, such as electric power, mining, steel metallurgy, petrochemical, water conservancy, transportation, building materials and many other industries. The equipment for the motor is pump, machine tool, fan, mill, crusher, rolling mill, compressor and many other industrial equipment.
60Hz Wound Rotor Slip Ring Motor Ball Mill Motor

 

You Might Also Like