Products

EPDM Cold Shrinkable Tube for Coaxial Connector and Power Cable Joints, Cold Shrink EPDM Tube for Hv Cable Splicing

China EPDM Cold Shrinkable Tube for Coaxial Connector and Power Cable Joints, Cold Shrink EPDM Tube for Hv Cable Splicing, Find details about China EPDM Cold Shrinkable Tube, EPDM Rubber Cold Shrinkable Tube from EPDM Cold Shrinkable Tube for Coaxial Connector and Power Cable Joints, Cold Shrink EPDM Tube for Hv Cable Splicing

Model NO.
CPE-pc
Trademark
HarshSeal
Transport Package
Standard Package
Specification
CPE
Origin
China
HS Code
8547200000
Model NO.
CPE-pc
Trademark
HarshSeal
Transport Package
Standard Package
Specification
CPE
Origin
China
HS Code
8547200000
HarshMet Cold Shrinkable EPDM Tube CPE Series
For Electrical, Telecom and Industrial Applications
 
Description
 
HarshMet Cold Shrinkable tubes are a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition. The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides or sulphurs. A wide range of diameter sizes and lengths will cover a range of 1000 volt cables, copper and aluminium conductors.
 
Features
 
Simple installation, requires only workman's hands
Accommodates a wide range of cable sizes
No torches or heat required  
Good thermal stability
Seals tight, retains its resiliency and pressure even after prolonged years of ageing and exposure
Excellent wet electrical properties
Improved tough rubber formulation to with stand rough backfilling
Resists fungus v Resists acids and alkalis
Resists ozone and ultraviolet light
 
Applications
 
Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splices rated to 1000 volts
Directly buriable or submersible
For indoor, outdoor, or overhead use
Physical protection and moisture sealing for high-voltage, air-insulated connectors and lugs such as spacer cable and lug connections to bus bar
Insulation of secondary splices copper or aluminium conductors
Relocation of service v Dig-in repairs
Sheath repairs
Insulation of inline conductor transition connectors
Sealing of jumper-to-feeder and jumper-to-equipment RF coax connections
 
Mechanical & Electrical Properties
 
PropertiesTypical ValueTesting Method
300% Modulus3.5 MpaASTM D412-75
Ultimate Tensile Strength11.8 MPaASTM D 412-75
Ultimate Elongation750%ASTM D 412-75
Die C Tear38.6N/mmASTM D624C-73
Dielectric Strength19.1KV/mmASTM D149-75
     Moisture AbsorptionWt. Gain 1.3%24 hrs, 90°C, HO
Hardness        49AASTM 2240
 
 
Selection Table
 
P/N Inside Diameter of Supporting Spiral (MM)Application Range,MMRecovered Length,MMматериал
CPE18187.2~14.380-1000EPDM
CPE252510.1~20.9150-1000EPDM
CPE323212.9-27120-1000EPDM
CPE353513~30.1120-1000EPDM
CPE404015~35120-1000EPDM
CPE424215~36120-1000EPDM
CPE5050 17-44150-1500EPDM
CPE585823.5-50150-1500EPDM
CPE656527~58150-1500EPDM
CPE687023~61.5150-1500EPDM
CPE777726~70152-1500EPDM
CPE909034.5-83150-1500EPDM
CPE10510541.6~95150-1500EPDM
CPE12012046~110150-1500EPDM
CPE12612656-119.5203-1500EPDM
CPE14014060-126230-1500EPDM
CPE15515570-147254-1500EPDM
.....    

You Might Also Like