Products

Collared Eye Bolt Accroding to BS4278 -1

China Collared Eye Bolt Accroding to BS4278-1, Find details about China Lifting Bolt, Bolt and Eye from Collared Eye Bolt Accroding to BS4278-1

Model NO.
HK25
Finish
Hot Galvanizing
Capacity
0.1t-20t
Trademark
H-Lift or OEM
Transport Package
Carton or Gunny Bag/Pallet
Specification
BS4278-1
Origin
China
HS Code
7326901000
Model NO.
HK25
Finish
Hot Galvanizing
Capacity
0.1t-20t
Trademark
H-Lift or OEM
Transport Package
Carton or Gunny Bag/Pallet
Specification
BS4278-1
Origin
China
HS Code
7326901000

H-Lift COLLARED EYE BOLT ACCRODING TO BS4278-1

-Eye Bolts and Eye Nuts are also commonly known in the lifting industry as lifting eyes.

-Available in a wide range of metric and imperial sizes, aswell as high tensile steel or stainless steel.

-Galvanized or selfcolored

-Length adjustment and tensioning for masts,towers and other structures engineering applications.

-Elongated eyes or clevis end fittings for connection to shackles, wire rope assemblies and etc.

 
ITEMSIZEWLLDimensionsWeight
dTonBCDFHkg
HK2506M60.1221579180.06
HK2508M80.15221579180.06
HK2510M100.25221579180.06
HK2512M120.4221579180.06
HK2516M160.829201012230.15
HK2518M18136241214280.27
HK2520M201.640271416320.38
HK2522M221.645301518350.54
HK2524M242.552351721400.85
HK2527M272.558392023461.13
HK2530M30465442226511.62
HK2533M33472482429562.31
HK2536M366.381542732633.12
HK2539M396.390603036703.81
HK2545M458101683440796.40
HK2552M5212.5115763846899.00
HK2556M561612886435110012.99
HK2564M642014496485811217.50




Collared Eye Bolt Accroding to BS4278-1

Collared Eye Bolt Accroding to BS4278-1

Frequently Asked Questions

Q1. How often should lifting equipments be subject to thorough examantions?

Thorough examination of lifting equipment must take place every 12 months - or every 6 months if the equipment is used to lift people. Any accessories used in lifting should also be inspected every 6 months. These are the minimum requirements, where there is no formal 'examination scheme' drawn up by a competent person.

Q2. What is a competent person ?

A competent person is someone who has appropriate practical and theoretical knowledge and experience of the equipment for which they act as 'competent person'. This knowledge and experience can help them detect defects / weaknesses and assess whether they will affect the continued safe use of the equipment.

Q3. Does new lifting equipment have to be thoroughly examined before use ?

You must have lifting equipment examined in the following circumstances:

Before using it for the first time - unless the equipment has an EC Declaration of Conformity which is less than one year old and the lifting equipment was not assembled on site. If it was assembled on site, it must be examined by a competent person to confirm that the assembly was correct and safe.
After assembly, and before use at each location - for all lifting equipment that requires assembly or installation before use (eg tower crane) - to ensure it has been installed correctly and is safe for use


 

You Might Also Like