Products

Chain Type Hydraulic Jacking System for Tank Construction

China Chain Type Hydraulic Jacking System for Tank Construction, Find details about China Automatic Tank Lifter, Automatic Tank Hydraulic Jacking Sytstem from Chain Type Hydraulic Jacking System for Tank Construction

Model NO.
LYT
Max Height
0-4600mm
Certification
ISO 9001:2000
Condition
New
Engineer Oversea Service Is Available
More Than 5 Meter Tank
Trademark
WINCOO
Transport Package
Container
Specification
Steel
Origin
China
HS Code
8425421000
Model NO.
LYT
Max Height
0-4600mm
Certification
ISO 9001:2000
Condition
New
Engineer Oversea Service Is Available
More Than 5 Meter Tank
Trademark
WINCOO
Transport Package
Container
Specification
Steel
Origin
China
HS Code
8425421000
Chain Type Simple Hydraulic Jack
I.Product introduction
LYT-type hoist is composed of one-stage double-acting hydraulic cylinder, pulley block, load-bearing chain and oil way etc. Moveable pulley is used to enlarge chain stroke, i.e. traveling distance of the cylinder is 1/2 of lifting distance of the chain. It applies to inverted installation and construction of various large storage tanks (steel) and various storage tanks.
Chain Type Hydraulic Jacking System for Tank Construction
II.Product advantages
1, Hydraulic lifting is stable,safe and reliable. Due to the adoption of unified hydraulic control and single or partial (several) adjustment,the whole lifting process is relatively stable.The hoist is provided with synchronizing valve and hydraulic lock to prevent sliding and falling of the tank or heavy loads,which are caused by power failure and fracture of oil tube.Hydraulic lifting is stable, safe and reliable.
2, Construction quality is ensured.As the hoist is provided with synchronizer and adjustable function,lifting height can be controlled accurately.Due to above reasons, quality of the tank is ensured.
3, The equipment is easy to operate. Construction environment is good and work efficiency is high.
4, The equipment is well-adapted.As long as the number of hydraulic hoists is increased or decreased,the whole set of equipment can be applied to the inverted hydraulic lifting construction of large storage tanks with different volumes ranging from several thousand cubic meters to tens of thousands cubic meters.
5, The hydraulic pump station and the hydraulic hoist are placed in the tank for easy operation.Finally,a door-closing plate is reserved to move the equipment out of the storage tank,and the door-closing plate is group welded well.
6, The hydraulic pump station can be controlled singly or jointly,and has strong construction adaptability and excellent technical performance price ratio.
7, Short construction period,low cost and good economic benefit.Due to the high degree of modernization and the fast lifting speed of the complete set of equipment,it has low construction cost and good economic benefit.This technology is truly characterized with convenient and centralized control,simple operation, safety and reliability (no falling),accurate control of weld clearance and lifting height of heavy objects,which can ensure the quality of the project,save labor and reduce costs,and achieve remarkable economic benefits.
III.Product parameters
1, Technical performance parameters of hydraulic pump station:
Model of hydraulic pump stationTank volumeRated pressureRated flowPowerControl voltage of solenoid valveMotor drive rate
YB-7.2220L (700*550*580)25Mpa7.2L/minThree-phase Four-wire (380V)220V5.5KW
YB-14.5340L (750*650*650)25Mpa14.5L/min220V7.5KW
2, Technical performance parameters of the hoist:
Mode of LYT-type hoistLYT-120-2700LYT-200-2700LYT-300-2700
Rated lifting capacity (KN)120200300
Hydraulic area (mm)1130418859.625434
Rated oil pressure (MPa)252525
Piston stroke (mm)150015001500
Chain stroke (mm)270027002700
Cylinder safety equipmentDouble-direction oil-way hydraulic lock
Reinforcement measures2 adjustable pull rods
IV.Product photos
Chain Type Hydraulic Jacking System for Tank ConstructionChain Type Hydraulic Jacking System for Tank ConstructionChain Type Hydraulic Jacking System for Tank ConstructionChain Type Hydraulic Jacking System for Tank ConstructionChain Type Hydraulic Jacking System for Tank ConstructionV.Company Introduction
Wincoo Engineering Co., Ltd (WINCOO) is engaged in bringing the most suitable solutions/equipments for client, fabricators, EPC/C companies on pipe fabrication, tank construction, pipeline construction,industrial production lines, clean energy project and other industrial field.
We have ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour cost and higher efficiency construction/fabrication method and better quality during phase of project bidding.Based client's facility/site space availability, we are able to study/design and present matched configurations on project schedule, quality, cost and productivity to guarantee production pace is accordance with project requirement.To support project execution, we are always ready to work as fireman to give prompt supply on project materials from different consumables, tools, equipments/machines to special merchandise. With flexibility, we are also glad to perform as procurement agent in China to seek required supply resources.
VI. What we can bring to you?
1. Support you to win the project during bidding phase. We can provide your more suitable configurations to help you shorten the constrcution time.
2. We can provide all technical documents and advices to support you for construction procedure clearifications
3. We can calculate the most suitable number of hydraulic jack according to the weight of the tank
4. We can provide your suitable hydraulic jack accessories with much more competetive price from our long time business partner if you need.
5. We can provide site people training service, and operation service or manpower service or as a subcontractor.

You Might Also Like