Products

Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5601-6- 630kw

China Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5601-6-630kw, Find details about China Slip Ring Motor, Yrkk Motor from Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5601-6-630kw

Model NO.
YRKK5601-6-630KW
Number of Poles
6
Starting Mode
Serial Rotor Resistance Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
3kv/6kv/6.6kv/10kv/11kv
Protection
IP44 or IP54,IP55
Nsulation Class
F
Output Power
630kw
Cooling Method
IC611/IC616
Duty
S1
Frequency
50Hz/60Hz
Stator Winding
100% Red Copper
Rotor Winding
100% Red Copper
Driving
Steel Rolling Mill, Cement Mill,Sugar Rolling Mill
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Model NO.
YRKK5601-6-630KW
Number of Poles
6
Starting Mode
Serial Rotor Resistance Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
3kv/6kv/6.6kv/10kv/11kv
Protection
IP44 or IP54,IP55
Nsulation Class
F
Output Power
630kw
Cooling Method
IC611/IC616
Duty
S1
Frequency
50Hz/60Hz
Stator Winding
100% Red Copper
Rotor Winding
100% Red Copper
Driving
Steel Rolling Mill, Cement Mill,Sugar Rolling Mill
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5601-6-630kw
The power level, installation dimensions and electrical performance of the 6KV high-voltage slip ring three-phase asynchronous motor are in compliance with relevant IEC standards. The basic installation method of the motor is the horizontal bottom angle (IMB3), the working system is the continuous working system (S1), and the wound rotor is made of Class F insulation material.
The bearing of 6KV/10KV high-voltage wound rotor slip ring motor has two types of rolling bearing and sliding bearing, depending on the motor power and speed. If the motor has a high degree of protection, the protection level of the bearing will also increase. The rated frequency of the motor's power supply is 50Hz, the rated voltage is 6000V, and the basic type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also available upon request.
6KV/10KV high voltage winding rotor slip ring motor main outlet box is IP54 protection grade, generally installed on the right side of the motor (facing the motor shaft extension end), can also be installed on the left side of the motor according to the order requirements. Inside the main outlet box, outside There are separate ground terminals.
6KV high-voltage winding slip ring motor increases the setting and bearing temperature measuring device. It can also add heating device inside the motor. The shaft extension key of the motor generally adopts the tangential key, and the motor carbon brush is not lifting structure.
6KV/10KV  high-voltage wound rotor slip ring motor can be used to drive a variety of different machinery, such as compressors, pumps, crushers, cutting machine tools, transportation machinery and other mechanical equipment, in mining, machinery industry, petrochemical industry, power plants, etc. Used as prime mover in various industrial and mining enterprises. The motor used to drive the blower, coal mill, rolling mill and winch should indicate the purpose and technical requirements when ordering, and adopt special design to ensure reliable operation.
Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5601-6-630kw
Center height range: H355 ~ 1000mm
Power range: 220kW ~ 10000kW
Number of poles: 2/4/6/8/10/12
Rated voltage: 6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Protection level: IP54 or IP55
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC611/IC616
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).
Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5601-6-630kw
The 6KV/10KV  high-voltage wound rotor slip ring motor can increase the large starting torque at a small starting current. The motor is suitable for applications where the capacity of the feeder line is insufficient to start the squirrel-cage rotor, the starting time is long, the starting is frequent, and the small-range speed regulation is required. This series of motors has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, convenient installation and maintenance.
Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5601-6-630kw
Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5601-6-630kw
1. The outer packaging of the products are all standard export-oriented wooden plywood packaging.
2, the product packaging is protected by moisture, water plastic soft packaging
3. For products with special transportation requirements (such as temperature, fragile, variability, and easy to get wet), the packaging protection measures will be strengthened, and the target mark will be printed on the package.
4. There are obvious signs and symbols on the packing box that must be paid attention to during transportation and storage (such as position, moisture, rain, shockproof, lifting position, etc.).
Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5601-6-630kw
Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5601-6-630kw
The company insists on providing high-quality motor products and services to users, and has won high praise from many domestic and foreign customers. The company will receive many foreign merchants to visit our factory every year, and establish a good cooperative relationship through on-site inspection of our factory. Our company always welcomes customers to visit our factory.
Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5601-6-630kw
Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5601-6-630kw
There are many types of motor products manufactured and sold by our company. The main products are high- and low-voltage three-phase asynchronous motors. The motor structure types include squirrel-cage type and winding type. Among them, high-voltage synchronous motors mainly support air compressors and mine ball mill equipment. use. We adhere to the service tenet of "focus on products, service with heart" and provide high-quality motor products to customers.
Large/Medium-Sized High-Voltage Wound Rotor Slip Ring 3-Phase Asynchronous Motor Yrkk5601-6-630kw
 

You Might Also Like