Most Popular LCD Parking Sensor with four Sensors
1)Mini LED Display design
2) Double CPU design
3)Three colors,seven segments LED display
4)There is Switch on the display which is used to turn on or off built-in buzzer sound.
LED display size: 7.8 x 1.7x 3.2cm
Control box size: 8.5 x 7.1 x 2.5cm
Rate voltage: 12V DC
Operating voltage range: 9V - 16V
Rate current: 20mA - 180mA
Ultrasonic frequency: 40kHz
Detecting distance: 0.3- 2.5m
Alarm sound: ≥ 75dB
Working temperature: -40 - 80° C
Package Content:
1 x Main Control Box
1 x LED Display Indicator
4 x Parking Sensors
1 x Saw drill head
1 x Power Cable
2 x Double Side Sticker
1 x User manual
Below are some frequent questions which were asked about parking sensor system. We here list them for your references. As part of our continuous support to our customers, we look forward to hearing from you and assisting you.
If you have questions, please contact with us . We will reply them and put them on the web.
1. After installation, the display doesn't work or no beep
1) Check if the power supply wire is connected correctly
2) Check if the ignition is turned to ACC/ON
3) Check if the reverse gear is engaged
4) Check if all wiring connections are correct
5) Check if the display/speaker is damaged
6) Verify the ground connection
2. The obstacle position is not corresponding to the display indicator
1) Check if the sensors' wires are connected to the ECU in order according to the manual
3. When reverse gear is engaged, the display always indicates
1) Check if there are any obstacles within 1.5 m
2) Check if there are any sensors mounted too low or detecting the ground
3) Unplug a sensor at a time to check for response
4) Check if the sensors are mounted upside-down
4. No human voice warnings
1) Check if the version of this product is with voice warning
2) Check if the voice warning function is switched on
5. False alarm
1) Check if all sensors are plugged into the ECU in the correct position tightly
2) Check the installation height of sensors, and if any sensor detects the ground
3) Check if the sensor is damaged
4) Check the installation angle of sensor
5) Check if the display is damaged
6) Check if the display matches the ECU
7) Check if the ECU is damaged
8) Check if the electronic parts or devices in vehicle are interfering with the system
9) Check if the cables are damaged
10) Check if the ground wire needs to be connected to car body, or if the connecting point needs to be cleaned and with "0" voltage