HPM series high-pressure foaming machine is zhangjiagang strength and industrious Machinery Co. Ltd following the international latest high technology and according to word wide the PU industry that independent innovation high technology products .The main parts are import from foreign country, equipment technical and safely performance are reached the word wide advanced capacity. The equipment is widely used automobile industry, insulation industry, air conditioning industry, electric appliance industry and furniture industry and so on. Also, expanding the application field .
   HPM high -pressure foaming principle
   Both Polyol and Isocyanate are stored separately in two tank, and used two rotary axial metering pumps to take material to mixing head, two components injection to a small mixing room at high pressure and flow rate when mixing head started in the hydraulic control, and collide with each other instantly, pass moving transformation that reached to mixing and flow to mold control, after pouring output time that mixing head piston rod forward, all material are pushed to mixing chamber and mixing chamber is cleaned by piston rod, don't left any material. Component passed beside of piston rod return to material tank. If it don't inject in a long time , low-pressure recalculation switchover unit but two-control component into low recalculation.
  Because of equipment' exact calculation, has a small loss and needn't clean and it will be good at environment-protect and reduce the material costs. In the all areas that is to be more and more widely used.

The HPM20/20/10 machine is special designed for automobile seat cushion, head rest, steering wheel foaming, equipped with 3 components tank and metering system ( polyol 1, polyol 2 and isocyanate1) and 1 set of 4-components L-type dual-chamber mixing head. The component flow is controlled by flowmeter so that you can get different mixing ratio for the dual-hardness parts.
 Such key parts are imported, so its with high performance and reliability. The component flow is controlled by flowmeter.


* Water supply required: Processed running water, flow capacity: 300L/min. Brings R1the ball valve;
* The compressed air supply required: 0.7 Mpa, flow capacity: 600NL/min. Dry, oil-less, the dew point -20 degree Centigrade; With the 1.0Mpa pressure relief valve and R3/4 " the ball valve;

* Power supply required: Three phase 380V/50Hz plusmn 10% or as customer's local condition
Total power: ~45kw,
Control voltage: AC220V/DC24V;
* Weight: ~ 3, 500kg,
* Floor space: ~4, 000mm*5, 600mm