SMT Reflow Solder, Five Heating Zones Reflow Oven T960e

China SMT Reflow Solder, Five Heating Zones Reflow Oven T960e, Find details about China Reflow Oven, BGA Reflow Oven from SMT Reflow Solder, Five Heating Zones Reflow Oven T960e

Trademark
Puhui
Transport Package
1unit / Wooden Carton, 150*90*65cm
Specification
CE
Origin
China
Trademark
Puhui
Transport Package
1unit / Wooden Carton, 150*90*65cm
Specification
CE
Origin
China
LED SMD Reflow Oven T-960,T-960e,T-960W
SMT Reflow Solder, Five Heating Zones Reflow Oven T960e
Technical parameters

Model ---- T 960
The heating zone quantity ---- upper3 /down2
The heating type ---- intelligent level sirocco and rapid infrared heating
The operation direction ---- left ----> right
Delivery options ---- Net transmission+chain transmission
The speed of conveyer belt ---- 0-1600mm/min
The power supply ---- Three phase 5 line 380V 50/60Hz
Heating up time ---- Around 15mins
Temperature control range ---- Room temperature~300° C
Temperature control mode ---- PID closed-loop control
Temperature control accuracy ---- ± 3° C
PCB temperature distribution deviation ---- ± 2° C
Overall dimensions ---- 1450× 630× 470
SMT Reflow Solder, Five Heating Zones Reflow Oven T960e
1. This machine selects the intelligent level sirocco and rapid infrared heating technology controlling, equipped with special design wind wheel, speed stability and uniform temperature, suit for uninterrupted soldering the LED and BGA components.

2. This machine is equipped with the crawler-type and five temperature area heating systems, and each temperature area uses independent PID controlling and up-down heating type, can make the inside temperature more accurate and well-proportioned, just take about 15 minutes can let it heat up to the working temperature from the room temperature.

3. Intelligent temperature wave heating type, oversized capacity wave selection, has eight temperature waves can satisfy various welding technological requirements.

4. Use programmable technology, preset the temperature wave memory storage function, can complete the whole welding process automatically according to your presetting wave.

5. Adopt the thermocouple temperature measurement and add the compensation circuit, make the temperature measurement more accurate, the wave more perfect.
6. Use PID intelligent temperature control technology; Make the temperature control more accurately. Adopt the imported large current solid-state relay non-contact output can effectively avoid the IC or circuit board damage due to the rapid or uninterrupted warming up, make the whole welding process more scientific safety.

7. Transmission system adopt imported frequency conversion motor, PID closed-loop speed, equip with all the import 1: 150 turbine speed reducer, smooth operation, speed adjustable range 0-1600mm/min.

8. Adopt independent wheel structure and special stainless steel strut, durable wear-resisting runs smoothly, speed precision can reach + 10mm/min.

9. Independent cooling zone, to ensure the PCB board of low temperature when the required.

10. Friendly human-machine operation interface, perfect LCD display, no need to connect with the PC, can watch the whole repairing process very clearly.

11. Ergonomic design, practical and easily operated. Good build quality but at the same time light weight and a small footprint allows the T-960 to be easily bench positioned, transported or stored.
SMT Reflow Solder, Five Heating Zones Reflow Oven T960e

SMT Reflow Solder, Five Heating Zones Reflow Oven T960eSMT Reflow Solder, Five Heating Zones Reflow Oven T960e

==================== Other Notice ====================

Payment:

* We accept ESCROW and alipay here

* We also accept T/T, Western Union, MoneyGram, etc

Shipping:

·         We do not ship this product by Singapore /HK/ China Post Air Mail. Because it is hard to track and takes more time. Especially, it is not so fafe.

·         We will use FedEx/DHL/UPS/TNT/EMS for fast and safe shipping. We will use the most convenient one when you buy the product.

·         Before shipping, we will pack every product well for you. And please check the outside package when you receive the parcel well

·         If you have special requirement for shipping, please let us know in advance.

 

Warranty : 

·         We provide 12 months Warranty for our products!

·         If you are not satisfied with our products when you receive them, please return it within 10 days for a replacement or money back. Please contact me before you return it.

·         If item is defective in 1 months for product reason, we will send you a replaced spare part without extra charger, or offer refund after we receive the defective item.

·         If item is defective after 1 months, you can still send it back to us. We will fix it for you free of charge and send it back to you, but you should bear the shipping cost..

 
Company Information
 Tai'an Puhui  Electric Technology CO., LTD. Established in 2007,our company is a professional manufacturer engaged in the research, development, production, sale and service of BGA Rewok Station, Infrared Reflow Oven, Microcomputer Electronic heating plate, LED Light Welding Machine. We are located in the chest at the foot of Mount Tai, Qingdao, according to Hong Kong for less than 300 kilometers.
  Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company has applied for 16  patents. In addition, we have attained CE certificates.
  Selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as Europe and America, Australia, Southeast Asia. We also welcome OEM orders.
  To learn more about what we can do for you, contact us at any time. We look forward to establishing a good and long-term business relationship with you.

 
Mr.Bob
Overseas Marketing Manager
Tai'an Puhui Electric Technology Co.,Ltd.