Products

Home Use Bluetooth Neonatal Health Handheld Fingertip Pulse Oximeter

China Home Use Bluetooth Neonatal Health Handheld Fingertip Pulse Oximeter, Find details about China Pulse Oximeter, Pulse Oximeters from Home Use Bluetooth Neonatal Health Handheld Fingertip Pulse Oximeter

Model NO.
RX-O01
Certification
CE, ISO
Trademark
None
Transport Package
Carton Box
Specification
49*29*23cm
Origin
Shenzhen, China
HS Code
9018199000
Model NO.
RX-O01
Certification
CE, ISO
Trademark
None
Transport Package
Carton Box
Specification
49*29*23cm
Origin
Shenzhen, China
HS Code
9018199000
Device Dimension
57mm(L)*30MM(W)*31cm(D)
Weight
 approx:28g ,
screen
0.96 inch color LCD
Operating Temperature
-10°~+40°C
Operating Humidity
15%~95%
Atmospheric Pressure
70~106Kpa
Dimension
 57*30*31mm
Power Source
2*AAA 1.5V alkaline battery
Operating Current
25mA~50mA
SPO2 Accuracy
 70%~100%, ±2 digits
PR Accuracy
30~250bpm, ±2 digits, or 1%, Max.
Speaker
NC
G Sensor
NC
  • Product performance description
Light in weight, simple in operation, easy to use&carry
True color high resolution OLED/TFT LCD/LED
Strong anti-ambient light interference
Low power consumption
For on site monitoring, not for continuous monitoring
Applicable to hospital clinic, family oxygen bar sporing center, etc
With 6 display modes, big font, digital and PLETH
Four direction reading for OLED/TFT LCD display, two direction reading for LED
Low battery voltage indicator
Adjust the parameters in friendly menu
Low battery voltage indicator
2pcs standard AAA 1.5V alkaline battery supporting 20 hour continuous operation
Optional pouch.
Home Use Bluetooth Neonatal Health Handheld Fingertip Pulse Oximeter
  • Product usage introduction



    •  
  •  
1. Install two AAA batteries into battery cassette in correct polarities and cover it.         
2. Turn the Fingertip Pulse Oximeter on put one of fingers into rubber hole of the Oximeter(it is best to put the finger thoroughly) with nail surface upward, then releasing the clamp. Press power buttom for 2 seconds to trun the fingertip pulse oximeter on. Then oximeter will be automatically power off when no finger in the device for longer than 16 seconds.
Home Use Bluetooth Neonatal Health Handheld Fingertip Pulse Oximeter
  • Maintenance
1. Replace the batteries timely when battery indication is low. Clean surface of the Fingertip Pulse Oximeter before it is used in diagnosis for patients.
2.Remove the batteries inside the battery cassette if the Oximeter will not be operated for a long time.                                                 
3. It is better to preserve the product in a place where ambient temperature is -25°C  to 55°C(-13°F-131°F)andhumidityis15%-93%

You Might Also Like