Non-Interference 2.4G Digital Wireless Transmitter and Receiver for Reversing Camera Kits  


Digital 2.4GHZ Wireless 4-PIN Transmitter & Receiver for Car Rearview Camera Video Monitor  
 

This Device is for Car Rear view Monitor/Camera, it usually used for truck or commercial vehicles, it is 2.4GHz Digital wireless, it is easy installed and make your camera become a wireless camera.

 

Specification:

Power Supply:  +8~+28V

Current Consumption: 210mA, Max.230mA

Operating Temperature: -10~+60 ºC

Storing Temperature: -30~+85 ºC

Operating humidity:85%RH

POWER ON: 2S Max.

Latency: 150mS Max.

Resolution: VGA:640X480/D1:720X480

Frame Rate: VGA:30f/s/D1: 25f/s

Video Decode: MPEG4

Video in System: PAL/NTSC Auto detection

Voice Sample Rate: 16KHz/16BIT DAC ADPCM/PCM

Voice Frequecny Band: 20Hz~20KHz

ID/ BIT Pairing: 22(4KK)

SYSTEM Architecture: RISC(32Bit) SOC

Operation Frequency: 2400 ~ 2525MHz

RF Impedance: 50, Typ.

Voltage Standing Wave Ratio : 2:1

Output Power: 20dBm with Power control

RF Bit Rate: 4Mbps

Modulation: FSK/GFSK

Spread Spectrum: FHSS

Overlapping Hopping Channel: 125

Hopping Rate: 1200/S

CRCCheck Bit: 16

Line of Sight Range:  >200M

Receiving Sensitivity: -88dBm@4MHZ

RSSI Level: 4

Video Output impedance: 75, Typ.

Video Output Level: 1V p-p , Typ.

Video Polarity: NEGATIVE

Video Frequency Respone: ±5 dB, Max. 50Hz ~ 6MHz

Audio Output impedance: 200K, Typ.

Audio Output Level: 5mv~0.2V p-p , Typ.

S/N(340Hz ~ 3.4kHz:  63dB, Min

THD: (340Hz~ 3.4kHz,0.5 p-p ) 5 %, Max

Size: 80(L)X41(W)X18(H)