Semi Servo Under Pad Making Machine

China Semi Servo Under Pad Making Machine, Find details about China Semi Servo Under Pad Making Machine, Good Quality Under Pad Making Machine from Semi Servo Under Pad Making Machine

Model NO.
DNW-CD250SV
Trademark
DNWMachinery
Origin
Quanzhou, China
HS Code
8441809000
Model NO.
DNW-CD250SV
Trademark
DNWMachinery
Origin
Quanzhou, China
HS Code
8441809000
Design speed250meters per minuteMachine size24×8×5 M(L×W×H)
Working speed220meters per minuteWorking space28×10×6 M(L×W×H)
Qualified rate>= 98%Machine colorRice white ,can be changed by order
Efficiency>= 90%Product size400mm*600mm,  600mm*600mm, 900mm*600mm 3 sizes (according to order)
installation capacity250kw/pcsContainers4 X 40HQ
Electricity380V ±5%,50HZ PLC Control System      Mitsubishi 
Air pressure>=0.6Mpa    2.6m³/minServo motor      Mitsubishi 
Total weightAbout 78tonsAuto web guider                     BST
Machine frame structure and main characters:
1).Solid square steel frame: Panel 30mm thick , solid cage use 60 * 60mm square steel, the base use 120mm × 120mm square tube, back transmission gearbox are widened for easy repair. Bottom panel 18mm thick. The main frame panel adopts six-sided high-precision plane grinding and module design to ensure the stability of high-speed operation.
2).Adopt noise reduction in the transmission side frame of the whole machine.
3).The attached equipment is fixed on the ground after adjusting the height.
Driving system:
1)Multiple sets of servo motor control blades and feeding of raw materials,and main shaft driven other moving parts. The main raw material unwinding is driven by frequency control to ensure the accuracy and stability of the machine under high-speed operation, and can realize the replacement between different numbers without replacing the transmission parts. Direct setting on the PLC for easy operation and maintenance.
2)All cutter holders are CNC machined to ensure the cutting accuracy of the cutters and extend their service life.
3)The cutter is driven by a universal joint coupling.
4)Strongly synchronized belt widening
5)Each negative pressure air scoop is equipped with a separate valve; the air scoop driven wheel is installed with quick fixture to facilitate the removal of the belt; the lower side of the conveyor belt above the material is installed with support plate to prevent the polymer and foreign matters from falling and polluting the lower material (the belt specification is labeled for maintenance) .

Air supply:   
1)Vacuum, forming drum device, dust and waste collection in the production process, equipped with multiple air pumps and negative pressure fans.
2)The air circuit is set at the top of the equipment, made of galvanized pipeto reduce the generation of static electricity. The high-pressure fan supplies air uniformly and the pressure is adjustable.
3)The wind pipe is set at the top of the equipment, uniformly transported by galvanized pipe / PVC pipe, connected with the required gas distribution pipe at the nearest place, and arranged in order.
4)Adopt stainless steel pipes over the machine. (Except of conveying suction pipes) Higher strength.
5)essary distributing pipe at the nearest place, neatly arrangement

Servo System:
1)All blade and the driving parts are driven by servo motor.All servo motors unified controlled by PLC, realize the precious adjustment of each driving unit
2)Each servo motor running condition can be shown and revised through touchable screen.
3)Do not need to change any transmission part to change product's size
4)Machine can remotely controlled, change parameters according to client's request, can adjust the size of all raw materials 
5)It can delete the difference of mechanical running in time and guarantee the qualified rate.