Products

Reverse Circulation Hammers Pr52 (RC hammers)

China Reverse Circulation Hammers Pr52 (RC hammers), Find details about China RC Hammers, Types of Hammers from Reverse Circulation Hammers Pr52 (RC hammers)

Model NO.
RC55
Circulation
Reverse Circulation Swivel
Item No
What Is Reverse Circulation Drilling
Drills
China Reverse Circulation Water Well Drilling
Use
Reverse Circulation Problems
Companies
Reverse Circulation Drilling Companies
Hammers
Halco RC Hammers - Reverse Circulation
China
China Halco Reverse Circulation Drilling Hammers
Trademark
ROSCHEN
Transport Package
Wooden Box
Origin
China
HS Code
84314320
Model NO.
RC55
Circulation
Reverse Circulation Swivel
Item No
What Is Reverse Circulation Drilling
Drills
China Reverse Circulation Water Well Drilling
Use
Reverse Circulation Problems
Companies
Reverse Circulation Drilling Companies
Hammers
Halco RC Hammers - Reverse Circulation
China
China Halco Reverse Circulation Drilling Hammers
Trademark
ROSCHEN
Transport Package
Wooden Box
Origin
China
HS Code
84314320
Reverse Circulation Hammers & Bits

Roschen offers a complete line of Reverse Circulation hammers and spare parts, which can replace Roschen series Reverse Circulation Hammers & Bits. Hammers are available in a wide range of sizes and styles, to provide maximum performance and longevity on all RC drilling jobs.
              
Reverse Circulation hammers are designed with an inner sample tube that extends through the center and into the top of the hammer bit. The RC hammer exhausts the air between the bit splines and over the face of the bit. This forces the sample into the recovery holes in the face of the bit, through the center of the hammer and upward through the drill rod inner tubes to the surface for collection. The use of a shroud or collar is required when a RC hammer is used, to help direct the return air and cuttings up through the face of the bit.
                
Conventional DTH hammers can also be used in RC drilling operations, but increase the potential for sample loss and contamination. A conventional DTH hammer is used in conjunction with a cross-over sub located between the hammer and drill rod. The sample travels from the face of the bit up the outside of the hammer and into the cross-over sub. 
The sub directs the sample up the center of the dual wall rods and to the surface.
            

REVERSE CIRCULATION DRILLING HAMMERS AND BITS

We offer a full range of reverse circulation down the hole hammers and bits, to suit all depths and ground conditions.

Due to its high-quality sample results, and speed of operation for shallower holes, reverse circulation drilling is becoming increasingly popular around the globe. In fact, it's the most widely accepted chip sampling method. This is largely due to our innovative designs, and we're continuing to develop the capabilities of this valuable sampling method. Partner with Roschen for your reverse circulation down hole hammer drilling.         

Advantages: 
1. High penetration rates in all rock conditions
2. Quality samples from areas of lost circulation
3. Large, uncontaminated sample return
4. Increased longevity means lower cost per meter
5. The option of diamond-enhanced carbide bits for deep and abrasive drilling conditions, with no bits sharpening required. 
 
ROSCHEN RC 
Hammer Series		RC Hammer
Size		Hammer modelHole range
ROS RC 303"RE53186 mm - 102 mm (3 ⅜ in. - 4 in.)
ROS RC 505"RE542118 mm - 133 mm (4 ⅝ in. - 5 ¼ in.)
ROS RC 505"RE543124 mm - 133 mm (4 ⅞ in. - 5 ¼ in.)
ROS RC 505"RE545127 mm - 140 mm (5 in. - 5 ½ in.)
ROS RC 505"RE120127 mm - 140 mm (5 in. - 5 ¾ in.)
ROS RC 505"RE040127 mm - 140 mm (5 in. - 5 ½ in.)
ROS RC 555.5"RE052133 mm - 143 mm (5 ⅜ in. - 5 ⅝ in.)
ROS RC 555.5"RE054137 mm - 146 mm (5 ⅜ in. - 5 ¾ in.)
  
PR52 hammer technical date:
Length (less bit)1227mm
Weight (less bit)68.5kg
External diamaterφ121mm
Bit shankPR52
Hole rangeφ126-φ142
Connection thread4"-4.5" Remet  4"-4.5" Metzke
Working pressure1.5Mpa-3.5Mpa
Air consumption1.7 Mpa16 m³/min
 2.4 Mpa 22 m³/min
 3.0 Mpa 28 m³/min
       

ROSCHEN RC hammer technical data:  
ROSCHEN RC Hammers Specifications
Hammer SizeHammerBit ShankROSCHEN CodeHole Range (mm)External Diameter (mm)Length (without bit) mmWeight (N.W.) kgsConnection ThreadWorking Pressure
3"RE531RE531ROS RC 3084-100811069293" Remet1.0-3.0Mpa
3"RE035RE035ROS RC 3584-105851075353" Remet1.0-3.0Mpa
4 1/2"RE004RE004ROS RC 40111-1271071252523.5"-4" Remet 4" Metzke1.0-3.0Mpa
4 1/2"RE540RE540ROS RC 45111-1271071252523.5"-4" Remet 4" Metzke1.0-3.0Mpa
5"RE040RE040ROS RC 50113-130109.51191573.5"-4" Remet 4" Metzke1.0-3.0Mpa
5"RE542RE542ROS RC 50113-130109.51191573.5"-4" Remet 4" Metzke1.0-3.0Mpa
5"RE543RE543ROS RC 50120-1351161191623.5"-4" Remet 4" Metzke1.0-3.0Mpa
5"RE545RE545ROS RC 50122-135117.51261654"-4.5"Remet 4"-4.5" Metzke1.5-3.5Mpa
5 1/2"RE547RE547ROS RC 55130-146124.51270714.5"Remet 4.5" Metzke1.5-3.5Mpa
5 1/2"RE052RE052ROS RC 55130-146124.51270714.5"Remet 4.5" Metzke1.5-3.5Mpa
5 3/4"RE054RE054ROS RC 55130-146124.51270854.5"Remet 4.5" Metzke1.5-3.5Mpa
5 3/4"RE140RE140ROS RC 55130-146124.51270854.5"Remet 4.5" Metzke1.5-3.5Mpa
5"PR40PR40ROS RC 50124-142120.5136280.53.5"-4.5" Remet 3.5"-4.5" Metzke1.5-3.5Mpa
5 1/2"PR52PR52ROS RC 55126-142121122768.54"-4.5"Remet 4"-4.5" Metzke1.5-3.5Mpa
5 1/2"PR52RPR52/PR52RROS RC 55130-1461241225654"-4.5"Remet 4"-4.5" Metzke1.5-3.5Mpa
5 1/2"PR54PR54ROS RC 55135-150130129484.54.5"Remet 4.5" Metzke1.5-3.5Mpa
6"MX5456MX5456ROS RC 60136-1501321362904.5"Remet 4.5" Metzke1.5-3.5Mpa
6"~6 1/2"RC62/RC62RRC62/RC62RROS RC 65152-1901461320110As Request1.5-3.5Mpa
8"RC82/RC82RRC82/RC82RROS RC 80190-2501801395185As Request1.5-3.5Mpa
10"RC100/RC100RRC100/RC100RROS RC 100250-3702401528328As Request1.5-3.5Mpa
Notes: 
Metzke, Remet thread is available!
Any special type shank of RC Hammer will be available by requests.


Specification: 
NoRC Bit SizeRC Hammer Series Model Diameter SpecificationsROSCHEN RC
Bit Series
13" RC bits: diameter 84mm-100mm shank RE531ROS RC 30
24" RC Bits:Diameter (104mm-127mm); Shank type: RE004/RE004R;RE542ROS RC 40
35" RC Bits:Diameter(113mm-146mm); Shank type: RE543, RE545, 
RE547; PR40, PR52, PR54; MX5456		ROS RC 50
46" RC Bits: Diameter(152-190mm); Shank type: RC62/RC62R; ROS RC 60
58" RC Bits: Diameter(190-250mm); Shank type: RC82/RC82R; ROS RC 80
610" RC Bits: Diameter(250-370mm); Shank type: RC100/RC100R.ROS RC 100
*Any special size woulbe be against customer's requirements 

We can also provide related products DTH hammers and bits, ODEX system, symmetrix systems, slide block drilling systems, etc and DTH drilling pipes for various thread API REG, API IF, BECO, etc







FAQ

Q: Are you a manufacturer or trading company?
A: We are a specialized manufacturer.

Q: How about the delivery terms?
1. Payment: T/T, L/C, Western Union, Paypal, 30% deposit in advance and rest before delivery.
2. Min. order quantity: 1 piece.
3. Transportation: By DHL/TNT/Fedex express, air, sea, train.

Q: How about discount?
A: Price is based on products and order quantity.

Q: Do you accept sample order?
A: Yes sure, please contact us for details.

Q: How about your after-sales service?
A: As a manufacturer, we offer promt technology support for all problems and questions. Besides, we accept goods return or replace for quality problem.

Q: How does your company control the quality?
A: Quality first. In order to guarantee high quality for our products, Roschen always makes a serious inspection for all products and raw materials in strict procedure. We have obtained certificate of ISO9001:2000 in 2004.
 


For more information, please contact:
                                                                    

ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED      
 
  
Website: http://roschen.en.made-in-china.com
ttp://roschen.en.made-in-china.com

You Might Also Like