Products

1250kw Slip Ring Asynchronous AC Motor

China 1250kw Slip Ring Asynchronous AC Motor, Find details about China Yr Motor, High Voltage Motor from 1250kw Slip Ring Asynchronous AC Motor

Model NO.
Yr6304-10-1250kw
Number of Poles
10
Starting Mode
Auto-induction Voltage-reduced Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
3kv/6kv/6.6kv/10kv/11kv
Nsulation Class
F
Output Power
1250kw
Cooling Method
IC01/IC411
Protection
IP23/IP44/IP54
Duty
S1
Frequency
50Hz.60Hz
Wire
Copper Wire
Driving
Compressor, Pump, Crushers, Stock-Removing Machine
Trademark
JULUN
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Model NO.
Yr6304-10-1250kw
Number of Poles
10
Starting Mode
Auto-induction Voltage-reduced Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
3kv/6kv/6.6kv/10kv/11kv
Nsulation Class
F
Output Power
1250kw
Cooling Method
IC01/IC411
Protection
IP23/IP44/IP54
Duty
S1
Frequency
50Hz.60Hz
Wire
Copper Wire
Driving
Compressor, Pump, Crushers, Stock-Removing Machine
Trademark
JULUN
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
1250kw Slip Ring Asynchronous AC Motor
The power level, installation dimensions and electrical performance of the HV high-voltage slip ring three-phase asynchronous motor are in compliance with relevant IEC standards. The basic installation method of the motor is the horizontal bottom angle (IMB3), the working system is the continuous working system (S1), and the wound rotor is made of Class F insulation material.
The bearing of HV wound rotor slip ring motor has two types of rolling bearing and sliding bearing, depending on the motor power and speed. If the motor has a high degree of protection, the protection level of the bearing will also increase. The rated frequency of the motor's power supply is 50Hz, the rated voltage is 6000V/10000V, and the basic type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also available upon request.
HV winding rotor slip ring motor main outlet box is IP54 protection grade, generally installed on the right side of the motor (facing the motor shaft extension end), can also be installed on the left side of the motor according to the order requirements. Inside the main outlet box, outside There are separate ground terminals.
HV winding slip ring motor increases the setting and bearing temperature measuring device. It can also add heating device inside the motor. The shaft extension key of the motor generally adopts the tangential key, and the motor carbon brush is not lifting structure.
HV wound rotor slip ring motor can be used to drive a variety of different machinery, such as compressors, pumps, crushers, cutting machine tools, transportation machinery and other mechanical equipment, in mining, machinery industry, petrochemical industry, power plants, etc. Used as prime mover in various industrial and mining enterprises. The motor used to drive the blower, coal mill, rolling mill and winch should indicate the purpose and technical requirements when ordering, and adopt special design to ensure reliable operation.
1250kw Slip Ring Asynchronous AC Motor
Center height range: H355 ~ 1000mm
Power range: 220kW ~ 10000kW
Number of poles: 2/4/6/8/10/12
Rated voltage: 3000V/6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Protection level: IP23 or IP44
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC01/IC611
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).
1250kw Slip Ring Asynchronous AC Motor
The HV wound rotor slip ring motor can increase the large starting torque at a small starting current. The motor is suitable for applications where the capacity of the feeder line is insufficient to start the squirrel-cage rotor, the starting time is long, the starting is frequent, and the small-range speed regulation is required. This series of motors has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, convenient installation and maintenance.
1250kw Slip Ring Asynchronous AC Motor
1250kw Slip Ring Asynchronous AC Motor
There are many types of motor products manufactured and sold by our company. The main products are high- and low-voltage three-phase asynchronous motors. The motor structure types include squirrel-cage type and winding type. Among them, high-voltage synchronous motors mainly support air compressors and mine ball mill equipment. use. We adhere to the service tenet of "focus on products, service with heart" and provide high-quality motor products to customers.
1250kw Slip Ring Asynchronous AC Motor
1250kw Slip Ring Asynchronous AC Motor
ZCL Electric Motor Technology Co., Ltd. is a company mainly engaged in the manufacture, research and development and sales of motor products. The company has many types of motor products, including IEC standard motors. It is a professional IEC motor manufacturer. Related motor products have passed the product certification in China, the United States, Canada, Europe, the Middle East and other regions, and the products are exported to all over the world. Companies adhere to the "focus on products, service" business philosophy, is committed to improving the quality of safe motor products and services for customers around the world.
1250kw Slip Ring Asynchronous AC Motor
1250kw Slip Ring Asynchronous AC Motor
Why choose us (our service advantage)
1. Professional motor manufacturing service provider;
2. Sound product quality management and certification system;
3. Have a professional sales and technical service team;
4. The motor has perfect process and strong mechanical processing capability;
5. High standard product technical service system;
6, good faith and mutual benefit, good credit guarantee.

 

You Might Also Like