Products

3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor

China 3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor, Find details about China Slip Ring Motor, Yrkk Motor from 3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor

Model NO.
Yrkk9001-6-3150kw
Number of Poles
6
Starting Mode
Serial Rotor Resistance Starting
Certification
ISO9001, CCC, Ce
Brand
China Motor
Voltage
3kv/6kv/6.6kv/10kv/11kv
Protection
IP44 or IP54,IP55
Nsulation Class
F
Output Power
1250kw
Cooling Method
IC611/IC616
Duty
S1
Frequency
50Hz/60Hz
Stator Winding
100% Red Copper
Rotor Winding
100% Red Copper
Driving
Steel Rolling Mill, Cement Mill,Sugar Rolling Mill
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Model NO.
Yrkk9001-6-3150kw
Number of Poles
6
Starting Mode
Serial Rotor Resistance Starting
Certification
ISO9001, CCC, Ce
Brand
China Motor
Voltage
3kv/6kv/6.6kv/10kv/11kv
Protection
IP44 or IP54,IP55
Nsulation Class
F
Output Power
1250kw
Cooling Method
IC611/IC616
Duty
S1
Frequency
50Hz/60Hz
Stator Winding
100% Red Copper
Rotor Winding
100% Red Copper
Driving
Steel Rolling Mill, Cement Mill,Sugar Rolling Mill
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor
The large high-voltage slip ring motor is a wound-type three-phase asynchronous motor. The power class, installation size and electrical performance of this type of motor are in compliance with relevant IEC standards. The basic installation method of the motor is the horizontal bottom angle (IMB3), the working system is the continuous working system (S1), and the wound rotor is made of Class F insulation material.
Large high-voltage slip ring motor bearings are divided into two types, rolling bearing and sliding bearing, depending on the motor power and speed. The rated frequency of the motor's power supply is 50Hz, the rated voltage is 6000V/10000V, and the basic type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also available upon request.
Large-scale high-voltage slip ring motor increases the setting and bearing temperature measuring device. It can also add heating device inside the motor. The shaft extension of the motor generally uses tangential keys. The motor carbon brush is not lifting structure. The front and rear bearing chambers of the motor are all There are oil filling and oil draining devices.
Large high voltage wound rotor slip ring motors can be used to drive a variety of different machines, such as compressors, pumps, crushers, cutting machines, transport machinery and other mechanical equipment, in the mining, machinery industry, petrochemical industry, power plants It is used as a prime mover in various industrial and mining enterprises. The motor used to drive the blower, coal mill, rolling mill and winch should indicate the purpose and technical requirements when ordering, and adopt special design to ensure reliable operation.
3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor
Center height range: H710 ~ 1000mm
Power range:800kW ~ 12000kW
Number of poles: 4/6/8/10/12
Rated voltage: 6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Protection level: IP54 or IP55
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC611/IC616
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).
3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor
The large high-voltage wound rotor slip ring motor can increase the large starting torque at a small starting current. The motor is suitable for applications where the capacity of the feeder line is insufficient to start the squirrel-cage rotor, the starting time is long, the starting is frequent, and the small-range speed regulation is required. This series of motors has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, convenient installation and maintenance.
3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor
3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor
Our company's motor manufacturing factory adheres to the concept of green, efficient and energy-saving production service, pays attention to the harmonious development of internal and external environment, builds environmentally friendly motor manufacturing enterprises, strictly implements motor standard process, and selects high-quality energy-saving materials to ensure the quality of motor products.
3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor
3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor
There are many types of motor products manufactured and sold by our company. The main products are high- and low-voltage three-phase asynchronous motors. The motor structure types include squirrel-cage type and winding type. Among them, high-voltage synchronous motors mainly support air compressors and mine ball mill equipment. use. We adhere to the service tenet of "focus on products, service with heart" and provide high-quality motor products to customers.
3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor
3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor
1. The outer packaging of the products are all standard export-oriented wooden plywood packaging.
2, the product packaging is protected by moisture, water plastic soft packaging
3. For products with special transportation requirements (such as temperature, fragile, variability, and easy to get wet), the packaging protection measures will be strengthened, and the target mark will be printed on the package.
4. There are obvious signs and symbols on the packing box that must be paid attention to during transportation and storage (such as position, moisture, rain, shockproof, lifting position, etc.).
3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor
3150kw Yrkk Series Large Size High Voltage Wound Rotor Slip Ring Motor
Why choose us (our service advantage)
1. Professional motor manufacturing service provider;
2. Sound product quality management and certification system;
3. Have a professional sales and technical service team;
4. The motor has perfect process and strong mechanical processing capability;
5. High standard product technical service system;
6, good faith and mutual benefit, good credit guarantee.
 

You Might Also Like