W11H -4X3000 high quanlity Bottom rollers Arc-Adjust plate bending rolling machine

China W11H-4X3000 high quanlity Bottom rollers Arc-Adjust plate bending rolling machine, Find details about China Rolling Machine, Universal Rolling Machine from W11H-4X3000 high quanlity Bottom rollers Arc-Adjust plate bending rolling machine

Model NO.
W11H-4X3000
Type
Roller-Bending Machine
Main Motor
30kw
Extra Services
Machining
PLC
OMRON or SIMENS
Electric parts
Siemens, Germany
Max Thickness
4mm
Trademark
HAVEN
Transport Package
Steel Pallet
Specification
Max. Thickness: 4mm, Max Width: 3000mm
Origin
China
HS Code
84622990
Model NO.
W11H-4X3000
Type
Roller-Bending Machine
Main Motor
30kw
Extra Services
Machining
PLC
OMRON or SIMENS
Electric parts
Siemens, Germany
Max Thickness
4mm
Trademark
HAVEN
Transport Package
Steel Pallet
Specification
Max. Thickness: 4mm, Max Width: 3000mm
Origin
China
HS Code
84622990
W11H-4X3000 high quanlity Bottom rollers Arc-Adjust plate bending rolling machine
W11H-4X3000 high quanlity Bottom rollers Arc-Adjust plate bending rolling machine
W11H-4X3000 high quanlity Bottom rollers Arc-Adjust plate bending rolling machine

Lower Roller Horizontal Adjust Three-roller Plate Rolling Machine

Preformance
 1.Italy Technology.
 2.Upper-roll fixed,the two rollers under a fixed turn around the center arc movement take-off and landing,under two separate movements canroll up or down with. 
 3.On a plate material does not need to complete U-turn and pre-bending roll-round school,and other processes.
 4.Rollers are mainly the work of the three-driven roller to ensure that any thickness of the material sent to a good rolling function.
 5.Due to the location of the three roller can rely on the close,to achieve a small diameter tube and rolling round the school.

Characteristics
 1.Easy to operate,rolling ways to diversify.
 2.Simple movement(horizontal and vertical movement of synthetic campaign to lift the arc trajectory),a small fault.
 3.Plate rolling process,always in a state of clamping,the deviation will not slide.
 4.The work of the three-roll,rollthe same track.
 5.Rollers work in any state to release the space work out ,no need to reach the top position.
 6.Microcomputer control, synchronization accuracy of ±0.2mm.

MODEL
Max. Thick
(mm) 
Max.
Width
(mm)
Yield
Limitat
(MPa)
Max. Speed
(m/min)
Min.
Diameter
(mm)
Top roller
(mm) 
Bottom
Roller
(mm) 
Main
Motor
(Kw)
Hydra
Motor
(Kw) 
W11H-4*2000420002455500160160224
W11H-4*3000430002455500190190225.5
W11H-6*2000620002455500190190227.5
W11H-6*3200632002455550230230227.5
W11H-8*2000820002455500210210227.5
W11H-8*3000830002454.56002502502211
W11H-10*20001020002454.55502302302211
W11H-10*30001030002454.56502702702215
W11H-12*200012200024546502702702215
W11H-12*300012200024546502702702218.5
W11H-16*200016200024547503003002218.5
W11H-16*250016250024547503003002218.5
W11H-16*300016300024548003303302218.5
W11H-20*250020250024548003303302218.5
W11H-20*300020300024549003603602222
W11H-25*250025250024541200370370227.5
W11H-25*3200253200245412004303703011
W11H-30*200030200024541200360290227.5
W11H-30*2500302500245412004203603011
W11H-30*3000303000245412004503903011
W11H-35*40003540002453.514005004004518.5
W11H-40*25004025002453.514005004003715
W11H-40*30004030002453.516005404404518.5
W11H-40*40004040002453.520005804805526
W11H-50*30005030002453.520005804805522
W11H-60*30006030002453.524006605607530
W11H-70*30007030002453.528007106209037
W11H-80*30008030002453.532007706809037
W11H-90*30009030002453.536082073011045
W11H-100*300010030002453.5400086077011045
W11H-110*300011030002453.5440090081013255
W11H-120*300012030002453.5480095086013255

 
2. Our Services
1: Response in time after getting customer's claim
1: Provide solution in 1 day
2: Usually solve problem within 2 days
2. For big machine, Installation Service is available as per customer's requirement


3. Training Service
Our technician is available to your factory and offer training of how to use our machines. As well, you may send your technician to our company to learn how to operate machines.


4. Quality Guarantee
We guarantee the quality of machine (e.g. processing speed and working performance is the same as the data of samples making). We sign the agreement with detailed technical data.
We arrange final test before shipment. We run the machine for a few days, and then use customer's materials for test. After making sure machine is the best performance, then make shipments.