NSK E Type 20: 1 Surgical Implant Contra Angle Dental Handpiece
China NSK E Type 20: 1 Surgical Implant Contra Angle Dental Handpiece, Find details about China 20: 1 Contra Angle, 20: 1 Dental Handpiece from NSK E Type 20: 1 Surgical Implant Contra Angle Dental Handpiece
Basic Info.
Model NO.
R20N-01C
Application
Adult
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Exhaust Outside
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Gear Ratio
20:1 Reduction
Noise
Less Than 70dB
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Model NO.
R20N-01C
Application
Adult
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Exhaust Outside
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Gear Ratio
20:1 Reduction
Noise
Less Than 70dB
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Product Desciption
Name: NSK SG20 20:1 implant contra angle dental handpiece
Order code: R20N-01T
Pack list :
1.20:1 contra angle *1 pcs
2.Cap spanner * 1 pcs
3.Operation manual * 1 pcs
4.E -type Oil spray nozzle *1 pcs
5.Internal water tube * 1 pcs
6.Tube fixture holder *1pcs
Parameter:
Titanium body appearance
Push button type
torque force: up to 55 N.cm
Rotation speed :5~2000RPM
ergonomics coating ,more hygeian.
Sterilization : up to 135 ºC
Applicable bur : Φ2.345-2.355mm
Fitting with E type motor , can be avaible to match up with Swiss, Japan, Korea famous brand implant system.
Insert or remove bur or drill
1) Inserting(Fig.1,Fig2)
Press the push button firmly, insert bur and turn the rod in clockwise direction, till the bur to the end.
Removal
Press the push button firmly and remove the bur.(Fig.3)
Handpiece inserting & removal:
Inserting
Insert the handpiece into the motor and turning all the way until it click to stop.(Fig.4)
2) Removal
Grip both handpiece and motor respectively,pulling and separating.
Notes:
Please do not insert or remove handpiece before motor complete stop turning.
Compatible with dental motor implant system in accordance with ISO standard.
Compatible with the electro-motor .
The structure of connector conform with ISO3964 standard.
Water Spray:
1) External water spray
Connect the water pipe and the external water spray pipe of handpiece.(Fig.5)
2) Internal water spray
Use internal bur to operate. Water pipe connect to the internal water spray pipe, and make the internal water spray pipe fixed with the pipe fixture. (Fig.6)
3) Mixed water spray
Use internal bur to operate, and follow step 1 and 2.
Maintenance & Care:
1. Cleaning
Remove bur from handpiece after using and brush. soak the head into clean water and operate for 15 seconds(Fig.7). Then autoclave handpiece.
If the handpiece is the type of head can remove one, please take off the head and wash it and the body with clean water.
2. lubricating(Fig.8)
Lubricate oil with E type oil nipple insert the handpiece and spray 2 or 3 seconds.
If handpiece head dirty enough, please remove the back cap with spanner and spray oil inside(Fig.9 and 10).
Please lubricate handpiece per 30 minutes while working continuous.
The handpiece shall be completely cleaned after several times use. Twist the handpiece and take off the upper part, wrench the bearing with bearing spanner and clearing the cartridge to keep the performance of the contra angle(Fig.11, the model of head can remove do not need this step).
3. Sterilization
It shall be sterilized before handpiece is used at the first time: Autoclave the handpiece for 12 min. at 135ºC
After each treatment, sterilizing handpiece in autoclave according to the following steps:
1)Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2)Lubricate handpiece.
3)Place into autoclaving pouch and mark.
4)Autoclave the handpiece for 12 min. at 135ºC.
Note:
Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.
Order code: R20N-01T
Pack list :
1.20:1 contra angle *1 pcs
2.Cap spanner * 1 pcs
3.Operation manual * 1 pcs
4.E -type Oil spray nozzle *1 pcs
5.Internal water tube * 1 pcs
6.Tube fixture holder *1pcs
Parameter:
Titanium body appearance
Push button type
torque force: up to 55 N.cm
Rotation speed :5~2000RPM
ergonomics coating ,more hygeian.
Sterilization : up to 135 ºC
Applicable bur : Φ2.345-2.355mm
Fitting with E type motor , can be avaible to match up with Swiss, Japan, Korea famous brand implant system.
Insert or remove bur or drill
1) Inserting(Fig.1,Fig2)
Press the push button firmly, insert bur and turn the rod in clockwise direction, till the bur to the end.
RemovalPress the push button firmly and remove the bur.(Fig.3)
Handpiece inserting & removal:
Inserting
Insert the handpiece into the motor and turning all the way until it click to stop.(Fig.4)
2) Removal
Grip both handpiece and motor respectively,pulling and separating.
Notes:
Please do not insert or remove handpiece before motor complete stop turning.
Compatible with dental motor implant system in accordance with ISO standard.
Compatible with the electro-motor .
The structure of connector conform with ISO3964 standard.
Water Spray:
1) External water spray
Connect the water pipe and the external water spray pipe of handpiece.(Fig.5)
2) Internal water spray
Use internal bur to operate. Water pipe connect to the internal water spray pipe, and make the internal water spray pipe fixed with the pipe fixture. (Fig.6)
3) Mixed water spray
Use internal bur to operate, and follow step 1 and 2.
Maintenance & Care:
1. Cleaning
Remove bur from handpiece after using and brush. soak the head into clean water and operate for 15 seconds(Fig.7). Then autoclave handpiece.
If the handpiece is the type of head can remove one, please take off the head and wash it and the body with clean water.
2. lubricating(Fig.8)
Lubricate oil with E type oil nipple insert the handpiece and spray 2 or 3 seconds.
If handpiece head dirty enough, please remove the back cap with spanner and spray oil inside(Fig.9 and 10).
Please lubricate handpiece per 30 minutes while working continuous.
The handpiece shall be completely cleaned after several times use. Twist the handpiece and take off the upper part, wrench the bearing with bearing spanner and clearing the cartridge to keep the performance of the contra angle(Fig.11, the model of head can remove do not need this step).
3. Sterilization
It shall be sterilized before handpiece is used at the first time: Autoclave the handpiece for 12 min. at 135ºC
After each treatment, sterilizing handpiece in autoclave according to the following steps:
1)Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2)Lubricate handpiece.
3)Place into autoclaving pouch and mark.
4)Autoclave the handpiece for 12 min. at 135ºC.
Note:
Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.
You Might Also Like
20 Inch Industrial Big Blue RO Water Filter
Wholesale Quantum Board 220W LED Grow Light for Grow Tent
Gl-II 200m Water Well Drilling Rig Wells Drilling Machine
Hot Sale Product 2021 DC Current Motor Arc Welding Machine O......
Sodium Stearoyl Lactylate ( SSL /CSL)
PC200-6 Excavator Hand Throttle Controller Manual 7834 -27-2......
Sound DJ Bass Speaker SA208b (DSP) PA Speaker System Profess......
Plastic LED Furniture Big Lamp for Nightclub
Kids Silicone Bowl Cup Baby Plastic Food Feeding Bowl
49S CRYSTAL RESONATOR 4.000MHz
Blr/Ek- 053s Refrigeration Line Filter Drier