CNC Gantry Move High-Speed Plates Drilling Machine
China CNC Gantry Move High-Speed Plates Drilling Machine, Find details about China Plate Drilling, High Speed Drilling from CNC Gantry Move High-Speed Plates Drilling Machine
Basic Info.
Model NO.
TPHD12025-2
Precision
High Precision
Certification
GS, ISO 9001
Condition
New
Trademark
SUNRISE
Transport Package
Plywood Case
Specification
22X6X3.6m
Origin
China
HS Code
8459210000
Model NO.
TPHD12025-2
Precision
High Precision
Certification
GS, ISO 9001
Condition
New
Trademark
SUNRISE
Transport Package
Plywood Case
Specification
22X6X3.6m
Origin
China
HS Code
8459210000
Product Desciption
Applicable Industry:
Mainly used for drilling tube plate, flange and large plate in petrochemical, boiler, wind power, flange industries and also for connection plates in building, bridge, heat exchange, iron tower industries. Drilling, tapping and light milling for workpieces. The carbide drill can be used for internal cooling high speed drilling, and high speed twist drills can be used to external cooling drilling.
Product feature:
The machine is mainly composed of bed and longitudinal slipway, gantry and horizontal slide table, vertical ram type drilling spindle box, worktable, chip remover, hydraulic system, cooling system, centralized lubrication system, electrical system, pneumatic system and other parts.
1. Heavy-load linear roller guide pairs (HIWIN, Taiwan) are equipped on two sides of the machine bed respectively. The longitudinal movement of the gantry's two sides is driven synchronously via Panasonic AC servo motor and precise ball screw pair of big pitch.
5. The gantry adopts steel plate welded structure, through heat aging stress, with stable precision. The machine bed, worktable, vertical slide board, transverse sliding rams are all adopt high quality iron castings.
6. There are several horizontal T-slots on the worktable, which are used for clamping clamps and tube plate parts.
9. The machine X, Y axis guide rails and lead screws are equipped with shields. X axis is equipped with steel plate protection cover, Y axis is equipped with organ type protective cover
10. In order to ensure the reliability of the machine tools, the key parts are imported with high quality, details see the main configuration list.
11. Workpieces positioning alignment and clamping.
For square workpeice to find the reference block is available on a supporting plate of T slot is fixed on the X and Y in two directions, the reference block square workpiece two adjacent tightly on the side of X and Y on the two direction; for aligning circular workpiece from square workpiece, the two adjacent quadrant reference block stick tight in the X and Y two direction. For easy moving heavy workpieces can be placed in any supporting plate T slot on the center position by edge finder in spindle hole in the measured workpiece diameter (or inner diameter) three points, through the computer CNC program the calculation is accurate and rapid. Workpiece clamping is composed by plate, rod, clamping rod and pad etc., easy to use.
Specifications:
Main Components List:
Mainly used for drilling tube plate, flange and large plate in petrochemical, boiler, wind power, flange industries and also for connection plates in building, bridge, heat exchange, iron tower industries. Drilling, tapping and light milling for workpieces. The carbide drill can be used for internal cooling high speed drilling, and high speed twist drills can be used to external cooling drilling.
Product feature:
The machine is mainly composed of bed and longitudinal slipway, gantry and horizontal slide table, vertical ram type drilling spindle box, worktable, chip remover, hydraulic system, cooling system, centralized lubrication system, electrical system, pneumatic system and other parts.
1. Heavy-load linear roller guide pairs (HIWIN, Taiwan) are equipped on two sides of the machine bed respectively. The longitudinal movement of the gantry's two sides is driven synchronously via Panasonic AC servo motor and precise ball screw pair of big pitch.
- Two movable slides are equipped on the cross beam of gantry. The sliders are guided by two linear roller guide pairs and driven by AC servo motor and precise balls crew pair of big pitch respectively.
- The slides on the cross beam are equipped with vertical CNC feeding ram-type drilling spindle, which adopts special conversion motor with heavy load for spindles. The motor drives the spindles via synchronous belt, stepless speed regulating, low speed with high torque. The drilling spindles (BT50) adopts Taiwan precision spindles (inner-cooling) with sweep device and disk spring automatic broach mechanism, hydraulic cylinder loosing cutter, very convenient to change shank.
- The hydraulic system solenoid valves adopt ATOS of Italy with stable quality.
5. The gantry adopts steel plate welded structure, through heat aging stress, with stable precision. The machine bed, worktable, vertical slide board, transverse sliding rams are all adopt high quality iron castings.
6. There are several horizontal T-slots on the worktable, which are used for clamping clamps and tube plate parts.
- It adopts FAGOR8055 CNC systems of Spain, equipped with RS232 interface and LCD screen. Drilling coordinate CAD/CAM direct conversion can be realized. With pre modeling and review function before drilling holes, convenient for operation.
- It is equipped with chain-plate type automatic chip-conveyor and chip collection trolley. The cooling system is equipped with paper filer, high-pressure inner-cooling pump and low-pressure outer-cooling pump, which are used for inner-cooling or outer-cooling of cutter. Coolant can be recycled.
9. The machine X, Y axis guide rails and lead screws are equipped with shields. X axis is equipped with steel plate protection cover, Y axis is equipped with organ type protective cover
10. In order to ensure the reliability of the machine tools, the key parts are imported with high quality, details see the main configuration list.
11. Workpieces positioning alignment and clamping.
For square workpeice to find the reference block is available on a supporting plate of T slot is fixed on the X and Y in two directions, the reference block square workpiece two adjacent tightly on the side of X and Y on the two direction; for aligning circular workpiece from square workpiece, the two adjacent quadrant reference block stick tight in the X and Y two direction. For easy moving heavy workpieces can be placed in any supporting plate T slot on the center position by edge finder in spindle hole in the measured workpiece diameter (or inner diameter) three points, through the computer CNC program the calculation is accurate and rapid. Workpiece clamping is composed by plate, rod, clamping rod and pad etc., easy to use.
Specifications:
| Model | TPHD12025-2 | |
| Max. workpiece size | 12000x2500mm | |
| Max thickness | 150mm | |
| Work table | Width of T slot | 28/500mm |
| Load bearing | 3t/ | |
| Vertical slide type drill head | Quantity | 2 |
| Main spindle taper hole | BT50 | |
| Max drill diameter | Φ50mm (Carbide drill) | |
| Φ65mm (HSS drill) | ||
| Main spindle speed | 30-2400r/min | |
| Motor power of spindle | 2x37kW | |
| Spindle stroke (mm) | 500 | |
| Distance between spindle lower end to worktable (mm) | 900-1400 | |
| (X axis) Gantry longitudinal move | Max. stroke | 12000mm |
| Moving speed of X axis | 0-8m/min | |
| Servo motor power of X axis (kW) / Torque (Nm) | 2x5/28.4 | |
| X axis positioning accuracy | 0.25mm/full length | |
| (Y axis) Power head transversal move | Max stroke | 3000mm |
| Moving speed of Y axis | 0-8m/min | |
| Servo motor power of Y axis (kW) / Torque (Nm) | 2x3/28.4 | |
| Y axis positioning accuracy | 0.1mm/full length | |
| (Z axis) Vertical slider feeding | Stroke of Z axis | 500mm |
| Feeding speed of Z axis | 0-5m/min | |
| Servo motor power of Z axis (kW) / Torque (Nm) | 2x3/28.4 | |
| Hydraulic system | Hydraulic pump pressure/flow rate | 6.5MPa / 25L/min |
| Hydraulic pump motor power | 3kW | |
| Pneumatic system | Compressed air pressure | ≥1MPa |
| Scrap cleaner and cooling | Scrap cleaner type | Plate chain type |
| Qty. scrap cleaner | 1 | |
| Scrap cleaner speed | 2m/min | |
| Motor power of scrap cleaner | 1.5kW | |
| Motor power of inner cooling water pump | 2x3kW | |
| Motor power of Outer cooling water pump | 0.75kW | |
| Automatic lubricating system | Lubrication pressure | 2MPa |
| Lubrication point oil injecting amount | 0.1mL | |
| Lubrication period | 6-10min | |
| Electric system | CNC system | FAGOR8055 |
| CNC axis NO. | 6 | |
| Total motor power | kW | About 110 |
| Overall size | LxWxH | About 22X6X3.6m |
| Weight | About 70t | |
Main Components List:
| NO. | item | model | Manufacturer |
| Main electric components | |||
| 1 | CNC system | 8055i | Spain FAGOR |
| 2 | Servo motor | 5kW | Japan Panasonic |
| Servo driver | 5kW | ||
| 3 | Servo motor | 3kW | |
| Servo driver | 3kW | ||
| 4 | Servo motor of main spindles | 37kW | China CTB |
| 5 | Servo driver of main spindles | 37kw | China CTB |
| 6 | low-voltage apparatus | ALL | Germany SIEMENS |
| 7 | Business computer | LCD | China Lenovo |
| 8 | Proximity switch | Normally open | Korea AUTONICS |
| 9 | Normally close | ||
| Main hydraulic components | |||
| 1 | Magnetic valve | All | ATOS Italy |
| main mechanical parts | |||
| 1 | spindle | BT50 | Taiwan KENTURN |
| 2 | Spindle head bearing | All | Japan NSK |
| 3 | Ball-screw | All | Taiwan HIWIN |
| 4 | Linear guide | X/Y/Z axis | Taiwan HIWIN |
| 5 | Gear rack (with anti backlash function) | X axis | Import |
| 6 | Worm and gear reducer | X axis | Import |
| 7 | Automatic lubrication system | Bijur | |
You Might Also Like
12f- 70 -11640 Loader Machinery Cutting Edge
50 Ton Crane Truck in Dubai for Sale (QY50KA)
Brand New 60tons Mobile Truck Crane (QY60K)
Anti- Acne Skin Beauty Weight Loss Photobiomodulation Light ......
Automatic Tape Edge Machine Manufacture for The Mattress Sew......
2-12 Pin Aviation Plug and Socket M16-M29, Threaded Circular......
Coin-Operated Shooting Gun Simulator Named The Gun of King f......
Reactive Dye Sublimation Ink for Textile Printer on Sales 5L......
Plastic Packing Seal, Plastic Security Seal Round
Wafer Type Butterfly Valve Pneumatic Actuator with Reasonabl......
Vinyl Plotter /Die Cut Plotter /High Precision Stepper Plott......
Bulk Arachidonic Acid Powder Ara Powder 10% 40 % CAS 506-32-......