Mgn Linear Guide with Block Mgn15 Mgn12 Mgn9 for CNC Machine

China Mgn Linear Guide with Block Mgn15 Mgn12 Mgn9 for CNC Machine, Find details about China Linear Guide, Linear Guides from Mgn Linear Guide with Block Mgn15 Mgn12 Mgn9 for CNC Machine

Basic Info.

Process

Butt Joint

OEM

Yes

Toco Taiwan Brand

Yes

Trademark

TOCO

Transport Package

Carton Box or Wooden Case

Specification

15, 20, 25, 30, 35, 45, 55, 65

Origin

China

HS Code

8487900000

Process

Butt Joint

OEM

Yes

Toco Taiwan Brand

Yes

Trademark

TOCO

Transport Package

Carton Box or Wooden Case

Specification

15, 20, 25, 30, 35, 45, 55, 65

Origin

China

HS Code

8487900000

Product Desciption

Advantages and Features of Linear Guideways

(1) High positional accuracy
When a load is driven by a linear motion guideway, the frictional contact between the load and the bed desk is rolling
contact. The coefficient of friction is only 1/50 of traditional contact, and the difference between the dynamic and the
static coefficient of friction is small. Therefore, there would be no slippage while the load is moving.

(2) Long life with high motion accuracy
With a traditional slide, errors in accuracy are caused by the counter flow of the oil film. Insufficient lubrication causes
wear between the contact surfaces, which become increasingly inaccurate. In contrast, rolling contact has little wear;
therefore, machines can achieve a long life with highly accurate motion.

(3) High speed motion is possible with a low driving force
Because linear guideways have little friction resistance, only a small driving force is needed to move a load. This
results in greater power savings, especially in the moving parts of a system. This is especially true for the reciprocating
parts.

(4) Equal loading capacity in all directions
With this special design, these linear guideways can take loads in either the vertical or horizontal directions.
Conventional linear slides can only take small loads in the direction parallel to the contact surface. They are also more
likely to become inaccurate when they are subjected to these loads.

(5) Easy installation
Installing a linear guideway is fairly easy. Grinding or milling the machine surface, following the recommended
installation procedure, and tightening the bolts to their specified torque can achieve highly accurate linear motion.

(6) Easy lubrication
With a traditional sliding system, insufficient lubrication causes wear on the contact surfaces. Also, it can be quite
difficult to supply sufficient lubrication to the contact surfaces because finding an appropriate lubrication point is
not very easy. With a linear motion guideway, grease can be easily supplied through the grease nipple on the linear
guideway block. It is also possible to utilize a centralized oil lubrication system by piping the lubrication oil to the
piping joint.

(7) Interchangeability
Compared with traditional boxways or v-groove slides, linear guideways can be easily replaced should any damage
occur. For high precision grades consider ordering a matched, non-interchangeable, assembly of a block and rail.

(8) Interchangeable To HIWIN
TOCO linear guides could be interchanged to HIWIN's. For example, TOCO rail could be installed to HIWIN's block.

Model list

Mgn Linear Guide with Block Mgn15 Mgn12 Mgn9 for CNC Machine