Products

Automatic Rubber Environment UV Weathering Aging Testing Chamber

China Automatic Rubber Environment UV Weathering Aging Testing Chamber, Find details about China UV Aging Testing Chamber, Rubber Aging Testing Chamber from Automatic Rubber Environment UV Weathering Aging Testing Chamber

Model NO.
HD-E802-2
Weight
100-500Kg
Power Source
AC220V
Condensation Temperature Range
40ºC~60ºC
Light Temperature Range
50ºC~70ºC
Delivery Time
15 Days After Receive The Deposit
Studio Size (W×d×h)
114cm×40cm×50cm
Chamber Material
SUS#304 Stainless Steel
Trademark
Haida
Transport Package
Strong Wooden Case
Specification
ISO9001: 2008
Origin
Dongguan, China
HS Code
9031809090
Model NO.
HD-E802-2
Weight
100-500Kg
Power Source
AC220V
Condensation Temperature Range
40ºC~60ºC
Light Temperature Range
50ºC~70ºC
Delivery Time
15 Days After Receive The Deposit
Studio Size (W×d×h)
114cm×40cm×50cm
Chamber Material
SUS#304 Stainless Steel
Trademark
Haida
Transport Package
Strong Wooden Case
Specification
ISO9001: 2008
Origin
Dongguan, China
HS Code
9031809090
Automatic Rubber Environment UV Weathering Aging Testing Chamber

Description:
Rubber quv accelerated weathering tester can simulate the harm caused by sunlight, rain and dew to the material, use the ultraviolet (UV) lamp to simulate the effect of sunlight, use the cold wet-like rain and dew.
The tested rubber material is placed at a certain temperature in a cycle of alternating light and moisture.
After a few days or weeks of testing, the damage seen outdoors can be reproduced for months to years.

Hazard types include: fading, discoloration, loss of light, silting, cracking, turbidity, foaming, embrittlement, strength degradation and oxidation.

Product Features:
1.Simulate the sun, rain spray and condensation resulting damage to test the materials by exposure to sunlight with moisture and temperature.
2.To get the results of damage after several days or weeks which is equal to expose to outside for a few months. The damages include fading, discoloration, brightness down, powder, crack, blur, brittle, strength decreases and oxidation.
3.Provide reference with testing data for improvement of existing materials, or to assess the impact of changes in product durability and other aspects.

Technical Parameters:
Studio size (W×D×H)1140mm×400 mm×500 mm
Overall size (W×D×H)1340mm×530 mm×1400 mm
Center distance of the lamp70mm
Distance between the specimen and the nearest parallel surface of the lamp surfaceabout 50mm±2mm
Wavelength rangeUVA wavelength range of 315 to 400nm, the peak at about 340nm
Radiation intensitywithin 1W/m2/340nm
Temperature resolution0.1ºC
Light temperature range50ºC~70ºC / temperature tolerance is ±3ºC
Condensation temperature range40ºC~60ºC / temperature tolerance of ±3ºC
Measuring range of blackboard thermometer30~80ºC / tolerance is ±1ºC
Temperature control modePID self - tuning temperature control mode
Humidity rangeabout 45%~70% R.H.
Water tank requirements water depth not more than 50mm, and with an automatic water supply controller
Standard specimen size75×150mm 48pcs
Recommended operating environment5~35ºC, 40%~85%R•H, 300mm away from the wall
Voltage220V±5%, single-phase three-wire, 50Hz, 10A, required 15A leakage switch
Lamp selectiondomestic Huaqiang lamp/American Atlecs lamp
Protection systemOverload short circuit protection
Over temperature protection
Water lacking protection
Earth leakage protection
Auto shut off protection
(The table parameters for the company Standard Model parameters, we support customer customization parameters)

Temperature control system:
1.UV cycle:
In the process of UV exposure test, temperature control is very important, and more important is to match the test temperature used in the accelerated test with the maximum temperature of the material in the practical application.
The UV temperature setting in the equipment can be anywhere from 50C to 70ºCC, depending on the level of illumination and indoor ambient temperature.
The temperature adjustment of the equipment is accomplished by a controller with microcomputer function to command a series of systems such as air heater, water heater and so on in the equipment.
2.Moisture circulation:
As the temperature increases, the destructive power of moisture on the material increases dramatically.
Therefore, in the process of wet exposure, temperature control is the most basic requirement.
Furthermore, to produce an acceleration effect, it is necessary to maintain a high temperature environment during the wet exposure.
The condensation temperature in the device can be set from 40ºC to 60ºC at any point.
3.Heating system:
U - type high - speed heating tube of titanium alloy is used
Temperature control and lighting completely independent system
The temperature control output power is calculated by microcomputer to achieve high accuracy and high efficiency
It has the function of preventing over-temperature of heating system.

Product Image:
Automatic Rubber Environment UV Weathering Aging Testing Chamber

The introduction of Haida

Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
Automatic Rubber Environment UV Weathering Aging Testing Chamber
Automatic Rubber Environment UV Weathering Aging Testing Chamber

Packaging & Shipping:

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

After-service:

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.


Customer Feedback:
Automatic Rubber Environment UV Weathering Aging Testing Chamber

FAQ:
 
Q:Are your company a trading one or a factory?
A:Factory + trade (integration),More than 12 years focusing on test equipment field,6 years exporting experience.

Q:After an order is placed, when to deliver?
A:Generally about 10-25days, If we have inventory, we can arrange shipment within 3 days.
Please be aware that our production lead times depend on specific items and item quantities.

Q:What about the warranty with after - sales services?
A:The testing machine is guaranteed for 12 months by HAIDA,we can help you to repair
your problem controller freely,even it's not from our factory. After the warranty, the professional after-sale service team will provide perfect technical support and help guests solve problems encountered while using our product, handles guest problems and complaints in a professional and timely.

Q:What about the product' services and quality?
A:Each equiopment must be carried out 100% quality examination and test when shipping and delivery goods. Product use training, each of our product provide video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer's company when you need. products are widely recognized and trusted by users.
A :Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.

Q: Can your products be customized?
A: Yes, our product can be customized according to your parameters.
 

You Might Also Like