1.PRODUCTION INTRODCTION
MP-S1 is a pump monitor designed to protect single-phase pumps from dry-well ,dead-head,jammed impeller,rapid cycle,overvoltage and undervoltage conditions.
It can protect 220v,2 or 3 wire, 0.37-2.2kw pumps,
A calibration adjustment allows MP-S1 to be calibrated your specific pumping applications,thereby reducing the possibility of false or nuisance tripping.
A proprietary microcontroller based on voltage,power factor and current-sensing circuit constantly monitors for power fluctuations ,overcurrent and underload conditions.
When an abnormality ,such as loss of suction,is detected ,MP-S1 deactivates its output relay and directly disconnects the pump motor.
MP-S1 then begins its user selectable "restart delay"(dry-well recovery)timer.
When the timer expires or power is removed and reapplied ,the MP-S1 reactivates its output relay and allows the pump to turn back on .
Model : | MP-S1 |
Application | Start & protect single phase pump, DOL |
Main technical data | |
. rated input voltage | AC220V-AC24V Single phase 50HZ/ 60HZ |
. rated output | 0.37kw-2.2kw (0.5hp-3hp) |
Product function / features | Over load protection Motor stalled protection Dry run protection with sensor free Under voltage protection Over voltage protection Transient surge protection Memory function when power off & recovery LCD screen displaying pump running status Push button calibration Reserved space for installing pump start capacitor |
Main installation data | |
Working temperature | -25ºC-- +55ºC |
Working humidity | 20%--90%RH, no drips concreted |
Degree of protection | IP54 |
Install position | Wall mounting |
Unit dimension (L x W x H) | 152 x 125 x 70 mm |
Unit weight | 380g |
2 Company Information 1)Brief introduction: as the supplier of pump control panel and control accessories, major products including: Intelligent Single / Dual Pump Control Panel, Motor Protector / Starter , Reverse Osmosis Controller, Anti-Clogging Reversal Pump Control Panel
More information, please visit:
pumpcontroller.en.made-in-china.com 2)Our location and communicationFrom Guangzhou to Changsha takes 1hour by air, 2.5hour by high speed train
From Shanghai to Changsha takes 1.5hour by air, 5hour by high speed train
From Beijing to Changsha takes 2.5hour by air
From Hong Kong to Changsha takes 2hour by air