Products

Box Type Operation Cabinet /Low Power Distribution Box Voltage Switchgear

China Box Type Operation Cabinet /Low Power Distribution Box Voltage Switchgear, Find details about China Power Operation Cabinet, Operation Cabinet from Box Type Operation Cabinet /Low Power Distribution Box Voltage Switchgear

Model NO.
XLP Series
Use for
Motor Operation, Automatic Control
Use for 2
Signal Monitoring and Alarm Device
Applied Rated Voltage
380V,
Applied Frequency
50Hz
Applied Motor Power
40kw and Below
Trademark
VILLE
Transport Package
Wooden Case
Specification
IEC CE, ISO
Origin
Ningbo
HS Code
8504231100
Model NO.
XLP Series
Use for
Motor Operation, Automatic Control
Use for 2
Signal Monitoring and Alarm Device
Applied Rated Voltage
380V,
Applied Frequency
50Hz
Applied Motor Power
40kw and Below
Trademark
VILLE
Transport Package
Wooden Case
Specification
IEC CE, ISO
Origin
Ningbo
HS Code
8504231100
Product Description
XLP series operation cabinet is used for electric motor operation, automatic control, signal monitoring and alarm
device, whose rated voltage is 380V, frequency is 50Hz and motor power is 40KW and below. This kind of
operation cabinet can also be used as a machine-nearby control box. This cabinet equips a reasonable
structure, flexible and various component and up to IP43 protection level. It applies for a large range of
industrial requirements.
 
General
 LV withdrawable switchgear cabinetis applicable to the low voltage distribution system with AC50Hz, rated
working voltage 380V. It contains power center (PC) and motor control center (MCC) functions. Each technical
parameter all reaches national standards. With characteristics of advanced structure, beautiful appearance,
high electric performance, high protection grade, reliable and safe and easy to maintain. It is the ideal
distribution device for low voltage power supply system in metallurgy, petroleum, chemical, power, machinery
and light weaving industries etc. The product accords with standards IEC-439, GB7251.1. 1.

Characteristics
1.they are assemble type combined structure. The basic skeleton is assembled by adopting special bar steel.
2.Cabinet skeleton, component dimension and starter size change according to basic modulus E=25mm.
3.In MCC project, parts in cabinet are divided into five zones (compartment): horizontal bus bar zone, vertical
bus bar zone, function unit zone, cable compartment, and neutral earthing bus bar zone. Each zone is
separated mutually for circuit's normal running and effectively preventing fault expansion.
4.As all structures of framework are connected and firmed by bolts, so it avoids the welding distortion and
stress, and upgrades the precision.
5.Strong general performance, well applicability and high standardization degree for components.
6.Draw-out and insert of function unit (drawer) is lever operation, which is easy and reliable with rolling bearing.

Service environment
1. Altitude above sea level should not exceed 2000M.
2. Ambient air temperature: -5ºC~+40ºC and the average temperature should not exceed +35ºC in 24h.
3. Air condition: With clean air. Relative humidity should not exceed 50% at +40ºC. Higher relative humidity is
allowed at lower temperature. Ex. 90% at +20ºC.
4. Places without fire, explosive danger, serious pollution, chemical corrosion and fierce vibration.
5. Installation gradient not exceed 5ºC.
6. Control center is suitable to the transportation and store with following temperature:-25ºC ~+55ºC, in short
time (within 24h) it should not exceed +70ºC.

External dimension
CodeModelWidth× Height× Depth
A025XLP(W)-1300× 400× 350
A026XLP(W)-2400× 550× 450
A027XLP(W)-3500× 650× 550
A028XLP(W)-4600× 800× 650
Box Type Operation Cabinet /Low Power Distribution Box Voltage Switchgear
Our Services
1.Pre sale service
a.make technical solution
b.send quotation, technical data sheet and drawing
c.prepare power transmission plan, testing plan,and shipment plan
2.In sale service
a.supervise the manufacturing schedule totally in accordance with the plan
b.send photos to customer during every manufacturing process(hold point)
c.inform the customer one week before testinng.
3.After sale service
a.installation and commissioning, training the workers
b.quick response within 12 hours any time
c.provide 12 months gurantee period normally.

FAQ
1. Q:What is your delivery time ?
A: Depend on the type of transformer.
2. Q:What is your payment term?
A: 30% advance by T/T , 70% before delivery by T/T or L/C or we can discuss about it.
3. Q:What kind of starndard you follow?
A: IEC, ANSI, CSA, GB, etc
4. Q:What kind of supporting documentation you can provide normally
A: Quotation,outline drawing,manufacturing plan, quality control plan
testing plan, financial report, type test report(KEMA, CESI),reference list,etc
5. Q:What is your normal wanrranty period?
A: 12 months after transformer operation.
6. Q:Can u do installation and commissioningin user's site?
A: Yes, we can send our installation team to user's country for service.
7. Q:Do you have any experience in this kind of transformer?
A: Yes, we can provide reference list for check.
8. Q:Are you manufacturer or trading company?
A: Manufacturer with own import & export company.
 
Our advantages:
Quality Assurance
--From the very beginning, VILLE ensures quality in every step to achieve the best quality.
 Experience Sharing
--With more than 30 years' experience in power industry, VILLE brings you an optimized solution.
 Global Service
--Wherever you are, VILLE global network will support and provide you with value.
 Quick Response
--In response to your needs without delay, VILLE  knows the value of your time.
 
Thanks for choosing VILLE as your reliable partner and
please trust both of us will create a brilliant future!

You Might Also Like