220kv Power Transformer with on Load Tap Changer

China 220kv Power Transformer with on Load Tap Changer, Find details about China Powertransformer, Transformer from 220kv Power Transformer with on Load Tap Changer

Basic Info.

Model NO.

S10 220KV

Usage

Power Transformer, Three Phase

Frequency Characteristics

High Frequency

Shape of Core

Ring

Brand

Ville

Test Certification

Kema Transformer Test

Voltage Range Hv

220 +-2X2.5% 242+-2X2.5% Kv

69 115 121 Kv

6.3/3.3/10.2/11/35/37/38.5kv

Rated Popower Definitionwer

40000kVA

Tap Changer

Mr or Hm China

Trademark

vilLE

Transport Package

Wooden Cases and Main Body Nude Packing

Specification

IEC Standard

Origin

China

HS Code

8504231200

Model NO.

S10 220KV

Usage

Power Transformer, Three Phase

Frequency Characteristics

High Frequency

Shape of Core

Ring

Brand

Ville

Test Certification

Kema Transformer Test

Voltage Range Hv

220 +-2X2.5% 242+-2X2.5% Kv

69 115 121 Kv

6.3/3.3/10.2/11/35/37/38.5kv

Rated Popower Definitionwer

40000kVA

Tap Changer

Mr or Hm China

Trademark

vilLE

Transport Package

Wooden Cases and Main Body Nude Packing

Specification

IEC Standard

Origin

China

HS Code

8504231200

Product Desciption

Technical parameters:

Cooling method
Winding	Connection	OLTC Position	Voltage
(kV)	Current A
(ONAN)	Current A
(ONAF)
HV	Star	1	207	529.9	892.5
		9	230	176.9	803.3
		17	253	433.6	730.2
LV	auto	9	132	831	1400
Tertiary	Delta	9	20	685.5	1155
7. Vector Group YN a0 d11
8. Impedance Voltage in Percent at 75
Power MVA	winding	Rated voltage kV	Impedance voltage %
40	HV/LV	230/132	18
9. No-load Current: 0.2%:
10. Sustained Short Circuit Current.
Winding	Max. Sustained Short-circuit Current. Ka
HV	8.5
LV	10.4
TV	19
11. Max. Duration of Short-circuits in Seconds(s)
HV: 3s
LV: 3 s
TV: 3s

Vector Group: Ynyn0d11
No-load losses 36kw
Load losses 178kw
No load current % 0.3
Short-circuit impedance% step-up HV-MV 22-24 HV-LV 12-14 MV-LV 7-9
Step down HV-MV 12-14 HV-LV 22-24 MV-LV 7-9

Structure characteristic:
1,Iron core
1. 1The iron core adopts cold-rolled crystal-oriented silicon steel plate 30Z140 with high quality, low-loss, and no
time effect, sheared by Geroge line and with no burr. 1.2 Iron core adopts pulling board structure, the upper
and down yoke is clamped by board, to form the frame structure. The iron core adopts advanced lamination
process, which effectively controls the no-load loss and electro-magnetic noise.
2 Winding
2.1 Winding adopts mature structure, which ensure the reliability of transformer operation.
2.2 The insulation power field intensity between turns shall be controlled no greater than 1.6kV/mm.

3,Body
3.1 Body adopts mature insulation structure, and strictly guarantee the main axial insulation margin.
3.2 Body mostly adopt multi-coil whole assembly, processed in constant voltage and evaporation, which made
coil shrink evenly and with less rebounce, and enhance the electric strength and mechanical strength.
3.3 Adopt laminating wood board or thermal shaped insulation cardboard. Pressed tightly with pin, which ensure
the winding is constantly pressed tightly.

4,leading wire
4.1 The layout of all leading wire is reasonable, which guarantees the enough electric distance and mechanical
strenth.
4.2 All leading wire is cirlulized ,which guarantee the reliable wild or prize connection.

5,Oil tank
5.1 Oil tank adopts structure of flat top, bell jar type, which add the mechanical strength of oil tank and also
make the appearance beautiful and graceful, site installation tend to be more convenient.
5.2 Pipeline with gas relay such as the oil tube and bushing hoist support on top of oil tank is with hoist
gradient, to facilitate the gas in transformer flow to gas relay.
5.3 Vacuum oiling is adopted, there is no leakage and permanent distortion in the following test. vacuum-
pumping :759mmHg load voltage test: bear 2 times the oil pressure of oil conservator oil surface for 24 hours.
5.4 The structure of transformer is convenient for disassembly and change of bushing and porcelain element.
5.5 The oil drip valve is set on the bottom of oil tank, sampling valve is set in the middle.
5.6 collective gas connecting tube is fixed on the bushing hoist support.
5.7 Transformer is of full-sealed structure, the upper and down oil tanks are required to welded fully.

6,Oil conservation tank
6.1 Adopt capsule type, finger type oil level indicator oil conservation tank.
6.2 The structure is convenient for internal cleaning, the capacity can ensure no oil overflow in 40 ambient
temperature with full load, and oil shall be seen from oil level indicator before put into operation in -25.
6.3 Oil conservation tank is equipped with oil-sealed moisture absorber.

7,Safety protection device:
7.1 Gas relay is fixed in transformer, the standard complies with ZBK41004-89Gas relay.
7.2 There is enough and reliable pressure release device, and matched with oil spray pipe, the direction of oil
spraying is downward.

8,Oil temperature measuring device:
8.1 There is pipe support of mercury thermometer, which is set on the top of oil tank.
8.2 There is temperature controller, the accuracy of thermometer complies with the related standard. Quantity
and technical requirement shall as per tender document.

9,Each component of transformer shall be prefabricated once in manufacture factory, marked, to ensure the
smooth procedure of site assembly. Before Ex-factory, inner core shall be check, and clean the fifth in
transformer.

220kv Power Transformer with on Load Tap Changer

Packing and Shipping
220kv Power Transformer with on Load Tap Changer

Our Best Service For You

1.	Pre sale service
a.	make technical solution
b.	send quotation, technical data sheet and drawing
c.	prepare power transmission plan, testing plan and shipment plan
2.	In sale service
a.	supervise the manufacturing schedule totally in accordance with the plan
b.	send photos to customer during every manufacturing process(hold point)
c.	inform the customer one week before testing.
3.	After sale service
a.	installation and commissioning, training the workers
b.	quick response within 12 hours any time
c.	provide 12 months guarantee period normally.

FAQ For You

1. Q:	What is your delivery time ?
A:	Depend on the type of transformer.
2. Q:	What is your payment term?
A:	30% advance by T/T , 70% before delivery by T/T or L/C or we can discuss about it.
3. Q:	What kind of standard you follow?
A:	IEC, ANSI, CSA, GB, etc
4. Q:	What kind of supporting documentation you can provide normally
A:	Quotation, outline drawing, manufacturing plan, quality control plan testing plan, financial report, type test report(KEMA, CESI),reference list, etc
5. Q:	What is your normal warranty period?
A:	12 months after transformer operation.
6. Q:	Can u do installation and commission in user's site?
A:	Yes, we can send our installation team to user's country for service.
7. Q:	Do you have any experience in this kind of transformer?
A:	Yes, we can provide reference list for check.

Our advantages:
Quality Assurance
--From the very beginning, VILLE ensures quality in every step to achieve the best quality.
Experience Sharing
--With more than 30 years' experience in power industry, VILLE brings you an optimized solution.
Global Service
--Wherever you are, VILLE global network will support and provide you with value.
Quick Response
--In response to your needs without delay, VILLE knows the value of your time.

Thanks for choosing VILLE as your reliable partner and
please trust both of us will create a brilliant future!