• The NSK sensor bearing consists of a ball bearing with a magnetic encoder to detect rotating speed and rotating direction.

• Model: 6206V, interchangeable with SKF 6206 encoder:
  • with AMP 4-Pin connector, replacing BMO-6206/064S2/UA108A and BMO-6206/064S2/UA106A
  • free cable end (without connector), replacing BMO-6206/064S2/UA008A and BMO-6206/064S2/UA002A
• Bearing: deep groove ball bearing 6206
• Number of pulses: 64 pulses / rotation
• Output pulse: channels A and B (phase shift: 90° ± 45°)
• Pitch accuracy: ± 5%

The two square waves are 90° out of phase with each other. This phase shift changes sign with the direction of rotation. The presence of two signals in quadrature enables a processing unit to multiply the number of angular position increments per revolution. For example, using a standard NSK sensor bearing with 64 pulses per revolution and a standard electronic interface that can detect the rising (Low/High) and falling (High/Low) times of each of the two signals, it is possible to obtain 256 electrical events per revolution, which translates to an angular resolution of 1,4°.

NSK motor encoder units use a compact and robust sensor that produces an incremental encoder signal. The sensor is accurate down to zero r/min. An integrated active circuit (requiring an external voltage supply) in the sensor body contains two Hall effect cells that produce an output signal consisting of two square waves.

The signals can be interpreted by motor controllers in different ways:

• Duty ration: 50 ± 15%
• Working voltage: DC 5V to 24V
• Output current: less than 20mA
• Operation temperatures: -40°C to 120°C
• Connector: 4-wire AMP waterproof connector
• Net weight: 240 g
•  Our Factory
  
  
  Contact US