Products

Biomass Pipe Hot Air Sawdust Dryer Wood Sawdust Dryer Hot Air Flow Type
Biomass Pipe Hot Air Sawdust Dryer Wood Sawdust Dryer Hot Air Flow Type

Biomass Pipe Hot Air Sawdust Dryer Wood Sawdust Dryer Hot Air Flow Type

China Biomass Pipe Hot Air Sawdust Dryer Wood Sawdust Dryer Hot Air Flow Type, Find details about China Hot Air Flow Type, Gas Oil Fired Hot Air Generator from Biomass Pipe Hot Air Sawdust Dryer Wood Sawdust Dryer Hot Air Flow Type

Model NO.
HAF
Fluid Bed Drying Equipment Type
Horizontal Fluid Bed
Vacuum Drying Equipment Type
Vacuum Harrow
Condition
New
Spray Tower Type
2500-6000
Evaporation Capacity (T/H)
2.5-11
Maximum Powder Output (T/H)
8-25
Matching Hot Air Furnace Type (Bhl-Z1)
400-1000
Rated Heating Capacity (104kcal/H)
400-1000
Rated Coal Consumption (Kg/H)
870-2175
Installed Capacity (Kw)
10.8-36.6
Natural Gas Heat Value
8550 Kcal/Nm3
Pressure
5~10kpa
Trademark
Banghua
Transport Package
Standard Export Package
Origin
Jinan
Model NO.
HAF
Fluid Bed Drying Equipment Type
Horizontal Fluid Bed
Vacuum Drying Equipment Type
Vacuum Harrow
Condition
New
Spray Tower Type
2500-6000
Evaporation Capacity (T/H)
2.5-11
Maximum Powder Output (T/H)
8-25
Matching Hot Air Furnace Type (Bhl-Z1)
400-1000
Rated Heating Capacity (104kcal/H)
400-1000
Rated Coal Consumption (Kg/H)
870-2175
Installed Capacity (Kw)
10.8-36.6
Natural Gas Heat Value
8550 Kcal/Nm3
Pressure
5~10kpa
Trademark
Banghua
Transport Package
Standard Export Package
Origin
Jinan
Product Description
1. It has low heating cost, that 20% of the diesel oil, 30% of heavy oil. Use bituminous coal as fuel and the thermal efficiency is more than 90%. The coal consumption of 1 ton base powder is about 70-100kg, saving energy of 30-40% compared with that of coal gas.
2. Tigh cleanliness of the hot air, almost same as the oil-fired. The dust content is less than 80mg/Nm3, with long cleaning period. All the hot air enters into the spray tower, and no secondary pollution during the production.
3. the hot air temperature is adjustable, from 200 to 800ºC, and the fluctuation range is ±5ºC.
4. The equipment is of strong durability, easy maintenance and low operating cost, and under high security, no danger of explosion.
5. Tt can be designed as your requirement.
Type
Gas consumption(Nm3/h)
Oil Consumption
Rated Heating Capacity(104 kcal/h)
Supporting Power(kw)
 
L*W*H
LRY(LRQ)10
11-24
10-20
10
0.25
2000*1200*1500
LRY(LRQ)30
35-40
30-34
30
0.3
2600*1500*1600
LRY(LRQ)60
71-83
60-70
60
1.1
3000*1700*1800
LRY(LRQ)100
118-153
100-130
100
2.2
3300*1800*1900
LRY(LRQ)180
212-224
180-190
180
4.5
4500*2500*2600
LRY(LRQ)240
283-294
240-250
240
5.5
5000*2600*2700
LRY(LRQ)360
424-494
360-420
360
11
6800*2700*2900
LRY(LRQ)500
588-635
500-540
500
15
7500*3000*3500
LRY(LRQ)700
824-1012
700-860
700
22
9000*3200*3900
Products Show
 
 

Energy efficient

It has low heating cost, that 20% of the diesel oil, 30% of heavy oil. Use bituminous coal as fuel and the thermal efficiency is more than 90%. The coal consumption of 1 ton base powder is about 70-100kg, saving energy of 30-40% compared with that of coal gas.
 

Environment friendly

High cleanliness of the hot air, almost same as the oil-fired. The dust content is less than 80mg/Nm3, with long cleaning period. All the hot air enters into the spray tower, and no secondary pollution during the production.

High efficiency

The hot air temperature is adjustable, from 200 to 800ºC, and the fluctuation range is ±5ºC.
Our Certifications
 
Best Banghua Industrial hot air generator
Biomass Pipe Hot Air Sawdust Dryer Wood Sawdust Dryer Hot Air Flow Type
Banghua provide you with customized and advanced complete equipment of direct coal-fired hot air furnace for drying ceramic powder etc. Energy efficient and high efficiency patent equipments will help you produce more competitive products. Compared with others', our equipment is easier to operate, with continuous and stable running, energy-efficient, high-efficiency, reliable and trustworthy quality.

 



Biomass Pipe Hot Air Sawdust Dryer Wood Sawdust Dryer Hot Air Flow Type
 
 

Features and advantages

BHL-Z1 consists of BHL coal-fired machine, combustion chamber and air mixing chamber. The bituminous coal is lifted to the burning bucket (located at one side of the coal-fired machine) by the coaling machine. When get to a certain height, the coal is sent to the combustion chamber at a constant speed by the chain grate stoker. The flue gas (1000ºC) generated by the burning coal is mixed with a certain amount of cold air. When get to about 650ºC, the hot air enters into the spray tower to dry the material. The temperature of the hot air can be adjusted according to different technical requirements, and the fluctuation range of the continuous hot air temperature is ±5ºC. The coal slag is discharged from the other side of the coal-fired machine to the slag discharging machine, and then sent out by the automatic scraper slag machine.
 

Favorable Comment

1. Low heating cost. Use bituminous coal as fuel and the thermal efficiency is more than 93%. The coal consumption of 1 ton base powder is about 70-90kg, saving energy of 15-20% compared with CWS furnace.
2. There's no black smoke in the hot air and the dust content is less than 120mg/Nm3. The hot air pipe is easy to clean, and no coking is produced. All the hot air enters into the spray tower, and no secondary pollution during the production.
3. The hot air temperature is adjustable, from 200 to 800ºC, and the fluctuation range is ±10ºC.
4. The equipment is of strong durability, easy maintenance and low operating cost, and under high security, no danger of explosion.
5. It can be designed as your requirement.
 
FAQ

 

Q: Are you trading company or manufacturer ?

A: Banghua International Granulation Engineering Co.,Ltd is specialized in the hot air furnace,heat exchanger technology research,development,design,production,installation,commissioning and other engineering contract.Relying on our own scientific and technological strength,we always commit to advanced stove,heat exchangers and other equipment design and manufacturing technology development. Self-developed direct coal (biomass)-fired hot air furnace and indirect coal (biomass)-fired hot air furnace which has hit the leading domestic level,are widely used in heating,drying,reaction,calcined and other industries.


The company has been passed the ISO9001:2008 international quality system certification.The company has completed product development system,quality management system and professional construction team,succeeded at home and abroad in undertaking hundreds of sets of hot air equipment design,manufacture,installation and commissioning.

Realistic,pragmatic,hard-working,enterprising,"Banghua"uphold "Honesty,cooperation and win-win"business philosophy,and always provide our customers with advanced technology,first-class products,quality service.We not only adhere to create more value for customers,but also to save energy,clean environment,promote human harmony with the environment to do our best.

 

Q: How long is your delivery time?

A: Generally it is 30-90, it is according to your details capacity demands and our factory busy situation.
Q: Do you provide client site case for investigation? 
A: Yes, we have many domestic and overseas site cases could for your investigation.
Q: What is your terms of payment ?
A: 40% T/T in advance, 50% balance before shippment, 5% after installation and commissioning acceptance, 5% within 10 working days from the date of the expiration of warranty period of one year . 
Biomass Pipe Hot Air Sawdust Dryer Wood Sawdust Dryer Hot Air Flow TypeBiomass Pipe Hot Air Sawdust Dryer Wood Sawdust Dryer Hot Air Flow Type
Why Choose Us
Professional with 15-year experience;
High quality and competitive price;
Customer oriented systematic overall solution;
Perfect after-sales service.


Any questions, please feel free to contact.
Sally Wu
 

You Might Also Like